Operation
To Transmit
To Transmit
Caution!
Be sure the antenna is properly
connected to the radio before
transmitting. Prolonged
transmitting without an
antenna, or a poorly matched
antenna, could cause damage
to the transmitter.
Be sure to read the F.C.C. Rules
1
Select desired
and Regulations included with
this unit before transmitting.
Setting
Setting Dynamike®
Dynamike
This controls the microphone sensitivity
®
(outgoing audio level).
1
Initially, set fully
voice volume is available. Dynamike® may have
to be reduced in some conditions.
20
Transmit
channel.
Push and hold mic button to transmit. Transmitter
1
is now activated. When transmitting, hold the
microphone two inches from your mouth and
speak in a clear, normal voice. Release to receive.
clockwise so that maximum
Operation
Transmit
21