Table of Contents
Advertisement
Operation
To Transmit
To Transmit
Caution!
Be sure the antenna is properly
connected to the radio before
transmitting. Prolonged
transmitting without an
antenna, or a poorly matched
antenna, could cause damage
to the transmitter.
Be sure to read the F.C.C. Rules
1
and Regulations included with
this unit before transmitting.
Setting Dynamike
Setting
Dynamike
This controls the microphone sensitivity
(outgoing audio level).
1
20
All manuals and user guides at all-guides.com
Select desired
channel.
Initially, set fully
clockwise so that
maximum voice volume is available. Dynamike
may have to be reduced in some conditions.
Transmit
Push and hold mic button to transmit.
1
Transmitter is now activated. When
transmitting, hold the microphone two inches
from your mouth and speak in a clear, normal
voice. Release to receive.
Operation
Transmit
21
Advertisement
Table of Contents
