Table of Contents
Advertisement
Operation
To Transmit
To Transmit
Caution!
Be sure the antenna is properly
connected to the radio before
transmitting. Prolonged
transmitting without an
antenna, or a poorly matched
antenna, could cause damage
to the transmitter.
Be sure to read the F.C.C. Rules
Select desired channel.
1
and Regulations included with
this unit before transmitting.
Transmit
PUSH &
HOLD
Push and hold mic button to transmit.
2
Transmitter is now activated. When
transmitting, hold the microphone two inches
from your mouth and speak in a clear, normal
voice. Release to receive.
14
Setting Dynamike®
This controls the microphone sensitivity
(outgoing audio level).
Initially, set fully clockwise so that maximum
3
voice volume is available. Dynamike may
have to be reduced in some conditions.
Operation
Setting
®
Dynamike
15
Advertisement
Table of Contents
