Valor 650JN Homeowner's Manual page 19

Frequently asked questions
Question
When I start my fi replace,
the fl ame is dirty or black, is
this normal?
Where can I purchase parts
for my fi replace?
Who can service my
fi replace?
Why does my pilot light go
out when I leave the house
for extended periods of
time?
Why doesn't the fi replace
turn down when it goes
above the temperature I've
set?
Answer
No. This is possibly caused by a blocked opening in the burner which
can be cleaned by vacuuming it. See pages 13-16 for cleaning
instructions, and call your dealer if the problem persists after cleaning.
Any of our Valor dealers are able to order parts or provide fi eld service.
Please contact your dealer - see page 3 - or visit
contact for a list of dealers near you.
We recommend having your fi replace serviced before initial use, and at
least once every year by a qualifi ed service technician. Contact our dealer,
quoting the model and serial numbers, if possible. These numbers can
be found on the fi replace information card attached to the fi replace - see
page 7.
Your fi replace has a built-in safety shutoff . If the fl ame height does not
adjust for 7 days, the fi replace will automatically turn the pilot off , and
would need to be turned on again using either the handset or wall switch.
Rather than constantly turning your fi replace up and down, the
temperature feature of your remote control is designed to effi ciently
give you a smooth maintenance of a comfortable temperature. With this
you may fi nd temperature fl uctuations beyond the set point to varying
degrees, depending on installation and room size.
valorfi replaces.com/
19