Table of Contents
Advertisement
[Cut Times]
The number of times to cut the same location. If it is impossible to cut even if you adjust
the cut force and cut speed, increase the cut times. (Default setting: 1)
Check item
Check the shape.
Peel off the circle.
Peel off the square.
6.
Click [Apply].
Repeat [Test Cut] and adjustment until correctly adjusted.
7.
Click [Close].
Result
The cut shape is distorted.
The square also peels off
Some uncut areas remain.
The blade leaves faint traces on the backing
paper.
The blade trace is indistinct.
The blade trace is too deep and cuts into the
backing paper
Cutting / Printing and Cutting
Setting item
[Cut Speed]
Reduce
[Cut Force]
Increase
[Cut Speed]
Reduce
No change
[Cut Force]
Increase
Reduce
Optimizing the Output Quality
Adjustment
39
Advertisement
Table of Contents
