Advertisement
Chapter 1: General Safety Rules
Read this Safety & Operating Manual before you use the SELF-FEEDING Chipper. Become familiar with the operation and
service recommendations to ensure the best performance from your machine.
Thoroughly inspect the area in which you will be working and remove all foreign objects. Look for Rope, Wire, ECT., and
remove these objects before chipping. Inserting these objects into the chipper hopper could damage the machine and/or
cause injury.
This is a high-powered machine, with moving parts operating with high energy at high speeds. You must use proper clothing
and safety gear when operating this machine to prevent or minimize the risk of severe injury. This machine can crush, grind,
cut and sever parts of your body it they enter the inlet or discharge area of your chipper.
Labels
Your DR SELF-FEEDING CHIPPER carries prominent labels as reminders for its proper and safe use. Shown below are copies of
all the safety and operation labels that appear on the equipment. Take a moment to study them and make a note of their location
on your DR SELF-FEEDING CHIPPER as you assemble and before you operate the unit. Replace damaged or missing safety and
operation labels immediately.
#241801
#242321
CONTACT US AT www.DRpower.com
#241851
3
Hide quick links:
Advertisement
