Simulation Mode - Furuno GP-7000F Operator's Manual

4. Press ▼ to choose an option and then press ► to close the window.
To cancel, press ◄.
5. To close all menus and option windows, press the [MENU] key.
To close option windows one by one, press the [CLEAR] key.
1.9

Simulation Mode

The simulation mode, which is for use by service technicians for demonstration
purposes, provides simulated operation to help acquaint users with the functions
of the unit. All keys are operative.
"SIMUL" appears at the bottom of the display when the simulation mode is
active.
Plotter
Own ship's mark moves from the default or selected position at the speed and
course set.
1. Press the [MENU] key to display the menu bar.
2. Rotate the [ENTER] knob to choose ADVANCED and then push the [ENTER]
knob.
3. Rotate the [ENTER] knob to choose GPS SIMULATION and then push the
[ENTER] knob to show the following window.
4. Rotate the [ENTER] knob to choose SIMULATION MODE and then push the
[ENTER] knob.
5. Rotate the [ENTER] knob to choose On and then push the [ENTER] knob.
6. Rotate the [ENTER] knob to choose COURSE and then push the [ENTER]
knob.
7. Enter the course (Setting range: 0 to 359) by rotating the [ENTER] knob,
pressing the ◄ or ►, and then press the SAVE soft key.
English
Italiano
Francais
Deutsch
Espanol
Norsk
Svensk
Portuguese
Language option window
SIMULATION MODE Off
COURSE 007 M
SPEED 001.0 Kts
DATE Apr/02/04
TIME 12:00:00 AM
CURSOR CONTROL Off
GPS simulation window
1. OPERATIONAL OVERVIEW
1-9