4. Do the following to set the Ethernet SFI:
1) Press the ACK/DELETE key to move the cursor to the leftmost of the input
position.
2) Enter the Ethernet SFI with the cursorpad and the numeric keys (combination
of two alphabets and four numerals).
Note: Set the SFI to eliminate overlap with other ones.
5. Move the cursor to [Enter] then press the NU/CU ENT key.
6. Press the MENU/ESC key to close the main menu.
3.4.3
Alert Mode
1. Press the MENU/ESC key to open the main menu.
2. Select [5 Alert] then [2 Mode].
Note: [3 Remote Ack I/F] is available when selecting [3 Legacy] in [2 Mode].
3. Select what sentences to use to manage alerts. For [1 Alert I/F 1] or [2 Alert I/F
2],go to step 6. For [3 Legacy], go to step 4.
[1 Alert I/F 1]: Use ALR and ACK sentences.
[2 Alert I/F 2]: Use ALC, ALF and ACN sentences.
[3 Legacy]: Use IIalr and IIals sentences.
4. Select [3 Remote Ack I/F].
5. Select [1 Ack] or [2 BuzzerStop].
[Ack]: Acknowledge an alert and stop the buzzer.
[BuzzerStop]: Stop the buzzer.
6. Press the MENU/ESC key to close the main menu.
Press the
ACK/DELETE key.
Backspace
3. ADJUSTMENTS
3-9