Specifications - Furuno GP-7000F Operator's Manual

SPECIFICATIONS OF GPS PLOTTER/SOUNDER
1 GENERAL
1.1 Display
1.2 Projection
1.3 Usable Area
1.4 Display Mode
1.5 Alarms
2 GPS RECEIVER
2.1 Receiving Channels
GPS
WAAS
2.2 Rx Frequency
2.3 Rx Code
2.4 Position Fixing System
2.5 Position Accuracy
GPS
WAAS
2.6 Tracking Velocity
2.7 Position-fixing Time
2.8 Position Update Interval 1 s
3 PLOTTER FUNCTIONS
3.1 Effective Projection Area Depending on chart card in use
3.2 Track Display
3.3 Memory Capacity
3.4 MOB
3.5 Quick Routes
3.6 Electronic Chart Card
GP-7000F
7-inch wide color TFT color LCD, 480 (W) x 234 (H) dots
Mercator
80° latitude or below
Plotter, Nav Data, Highway display, Compass display
Arrival and Anchor watch, Cross track error, Temperature,
Depth, Grounding, Ship's speed alarms
12 channels parallel, 12 satellites tracking
1 channel
1575.42 MHz
C/A code, WAAS
All in view, 8-state Kalman filter
10 m (95% of the time, HDOP≤ 4)
3 m (95% of the time)
999 kt
Warm start: 12 s approx., Cold start: 90 s approx.
Plot interval: by time
(1 sec, 5 sec, 10 sec, 30 sec, 1 min, 5 min, 10 min, 30 min, 1 h)
or by distance (0.01, 0.05, 0.1, 0.5, 1.0, 2.0, 5.0, 10.0 nm)
Track: 12000 points, waypoint: 2000 points
Route: 200 routes with 35 waypoints each
1 point
1 route
C-MAP NT+/NT MAX chart SD card
SP - 1
E4429S00A