Demo Mode - Furuno GP-3700F Operator's Manual

1. OPERATIONAL OVERVIEW
1.8

Demo Mode

The demo mode, available with both the plotter and echo sounder (connection of
transducer is not required), provides simulated operation of this unit. All controls are
operational. Use it in port or the like to acquaint yourself with the features of your unit.
When the demo mode is active, the indication [DEMO] appears at the top right of the
display.
Plotter
Own ship mark moves from the default position at the course and speed set.
1. Press the MENU key to open the main menu.
2. Select [0. SYSTEM SETTING].
3. Select [7. DEMO MODE].
4. Select [PLOTTER SIMULATION MODE].
5. Select [INTERNAL DEMO].
6. Select [SPEED SETTING].
7. Use the numeric keys to enter speed.
8. Select [CRS BRG SETTING].
9. Use the numeric keys to enter direction.
10. Select [LATITUDE SETTING].
11. Use the numeric keys to enter latitude. Use the CURSOR ON/OFF key to switch
the coordinate between north and south and vice versa.
12. Select [LONGITUDE SETTING].
13. Use the numeric keys to enter longitude. Use the CURSOR ON/OFF key to switch
the coordinate between east and west and vice versa.
14. Select [DATE SETTING].
15. Use the numeric keys to enter the start date.
16. Select [TIME SETTING].
17. Use the numeric keys to enter the start time, in 24-hour notation.
Note: The seconds indication is currently unavailable (for future use).
18. Select [COURSE SETTING].
1-14
The seconds indication
is currently unavailable
(for future use).