Navigation Data Display - Furuno GP-7000F Operator's Manual

2.4

Navigation Data Display

The navigation data display provides generic navigation data, and it is shown in
combination displays.
Appropriate sensors are required. Bars (- -) appear when corresponding sensor
is not connected.
Position
Speed
Depth
Changing the information displayed
1. Press and hold the [MENU] key down for two seconds to show Speed in
reverse video.
2. Rotate the [ENTER] knob to show data in reverse video.
3. Press the [ENTER] knob to show the selection window as shown below.
4. Rotate the [ENTER] knob to choose the data to show, and then press it.
The item window (ex. units) appears.
5. Rotate [ENTER] knob to select the unit.
The data selected at step 2 changes to your selection.
6. Press the [CLEAR] key to erase the reverse video.
LATITUDE
22º03.730N
SOG COG
12.0KTS 7º M
DATE
Apr/17/04
DEPTH
22.5 Ft
Navigation data display
SOG WSA
COG WDA
STW
DATE
HDG
TIME
DST TTG
BRG ETA
TRIP
DEST
DEPTH
TEMP
HDOP
VDOP
XTE
DRF
SET
Note: Contents may be changed
WST
WDT
Course
LONGITUDE
137º57.870E
TRIP
111.5 nm
TIME
12:28 AM
TEMP
10.3ºF
depending on data selected at step2.
2. PLOTTER DISPLAY
Trip meter
Temperature
2-5