Selecting A Display; Soft Keys - Furuno GP-7000F Operator's Manual

1.5

Selecting a Display

Fourteen screen displays are available as shown figure in below.
1. Press the [DISP] key to show the DISPLAY MODE screen.
TURN KNOB TO SELECT DISPLAY MODE AND PRESS KNOB TO ENTER.
2. Use the cursor pad or [ENTER] knob to select a mode.
To escape from the display mode screen without changing the display mode,
press the [DISP] key.
3. Press the [ENTER] knob to set the new display mode.
1.6

Soft Keys

The soft keys, their labels displayed at the bottom of the screen, provide for easy
execution of a desired function, and their label and function change according to
the display in use. When you turn on the power, the soft keys do not appear. To
show the soft keys, press any soft key. To access a soft key function, press the
appropriate soft key within five seconds after accessing them.
The soft keys disappear after five seconds. If you want to erase them earlier,
press the [CLEAR] key.
DISPLAY MODE
Display mode screen
1. OPERATIONAL OVERVIEW
Soft keys
1-5