Furuno GP-33 User Manual page 47

2. Select [Alarms], and press the ENT key.
3. Select an alarm item, and press the ENT key.
4. Do one of the following:
(Arrival/Anchor)
1) Select [Arrival] or [Anchor], and press the ENT key.
2) Press and ENT key.
3) Enter the alarm area, and press the ENT key.
(XTE, Speed, Trip and Odometer)
1) Select [On], and press the ENT key.
2) Press and ENT key.
3) Enter the value, and press the ENT key.
(WAAS)
Select [On], and press the ENT key.
(Time)
1) Select [On], and press the ENT key.
2) Press and ENT key in order.
3) Enter the time, and press the ENT key.
4) For 12-hour clock, press
5) Select [AM] or [PM], and press the ENT key.
(Speed Based Output)
1) Select [On], and press the ENT key.
2) Press and ENT key.
3) Enter the speed at which to close the contact signal, and press the ENT key.
4) Press and ENT key.
5) Enter the speed to open the contact signal, and press the ENT key.
5. Press the MENU/ZOOM key twice to close the menu.
Note 1: To cancel an alarm, select [Off] at 1) on step 4.
Note 2: You can activate the arrival alarm or the anchor watch alarm; they cannot be
activated together.
and ENT key.
6. ALARMS
6-3