Desktop Mount - Furuno GP-39 Operator's Manual

9. INSTALLATION
9.2.2

Desktop mount

1. Detach the display unit from the hanger.
Note: To detach the display unit from the hanger, align the arrow marks on the
unit and hanger. If the arrows are not aligned when you detach the unit, you may
damage the unit or the hanger.
2. Prepare four pilot holes (for 516 self-tapping screws) at the mounting location.
3. Fix the hanger to the mounting location with four self-tapping screws (516, sup-
plied).
4. Attach cables to the back of the display unit.
5. Attach the display unit to the hanger.
Note: To attach the display unit to the hanger, align the arrow marks on the unit
and hanger.
9-2
Self-tapping Screw
(5x16, 4 pcs.)
Hanger