How To Set Destination By Waypoint; How To Set A Destination Waypoint With The Cursor; How To Set A Destination Waypoint Through The List; How To Set Route As Destination - Furuno GP-33 User Manual

5. DESTINATION
5.2

How to Set Destination by Waypoint

You can set a waypoint as destination by using the cursor or the waypoints list.
5.2.1

How to set a destination waypoint with the cursor

1. On the plotter display, operate the cursorpad to place the cursor on the waypoint
which you want to set as the destination.
2. Press the ENT key.
3. Select [Goto], and press the ENT key.
4. Cancel the destination referring to section 5.4 when arriving at the waypoint.
5.2.2

How to set a destination waypoint through the list

1. Press the MENU/ZOOM key twice to show the main menu.
2. Select [Waypoints], and press the ENT key.
3. Select [Alpha] or [Local], and press the ENT key to show the waypoint list.
4. Select the waypoint to set as a destination, and press the ENT key.
5. Select [Goto], and press the ENT key to show the plotter display.
6. Cancel the destination referring to section 5.4 when arriving at the waypoint.
5.3

How to Set Route as Destination

You can set a route as destination through the list.
1. Press the MENU/ZOOM key twice to show the main menu.
2. Select [Route], and press the ENT key.
5-2
WP0000
Goto
Move
Edit
Delete