Mitsubishi Electric FR-CC2-P Instruction Manual page 132

5.8
Parameter clear / all parameter clear
POINT POINT
• Set "1" to Pr.CLR Parameter clear, ALL.CL All parameter clear to initialize all parameters. (Parameters cannot be cleared
when Pr.77 Parameter write selection = "1".)
• Terminal function selection parameters are not cleared with Pr.CL.
• Refer to the parameter list on
Screen at power-ON
1.
The monitor display appears.
Parameter setting mode
2.
Press to choose the parameter setting mode. (The parameter number read previously appears.)
Selecting the parameter number
To perform a parameter clear, turn
3.
. " " (initial value) appears.
Parameter clear
Turn to change the set value to "
alternately after parameters are cleared.
4.
Setting
value Pr.CLR Parameter clear
0 Initial display (Parameters are not cleared.)
Returns parameters excluding terminal function
1
selection parameters, etc. to their initial values.
page 170 for availability of parameter clear and all parameter clear for each parameter.
Operation
to
". Press
Turn to read another parameter.
Press to show the setting again.
Press twice to show the next parameter.
Description
Parameter clear / all parameter clear
, and to perform all parameter clear, turn it to
to enter the setting. " " and "
ALL.CL All parameter clear
Returns all parameters which can be cleared
including terminal function selection
parameters to their initial values.
and press
" ( ) blink
131
PARAMETER
5