Pentax ist Service Manual page 37

***** MAIN MENU *****
***** < B GROUP > *****
***** CCD POSITION *****
***** CCD POSITION ADJUSTMENT *****
MOUNT F ZOOM LENS 35‑80 ONTO CAMERA.
SET THE LENS TO MIN. DISTANCE (0.4M)
SET LIGHT SOURCE TO LV 12.
SET FOCUS‑MODE SW OF CAMERA TO MF.
AFTER CONFIRMING ABOVE, PRESS KEY [ Y ].
WHEN YOU RETURN TO FRONT MENU, PRESS KEY [ N ].
***** CCD POSITION ADJUSTMENT *****
Positioning Chart No.1.
[ 3 ] CCD POSITION CHECK
** POSITION CHECK **
AND TELE END (80MM).
** POSITION CHECK **
OK
27830 -36/40-
***** CCD POSITION ADJUSTMENT *****
SET 2M CHART NO1.*
SET 2M MASTER LENS.
SET FOCUS‑MODE SW OF CAMERA TO MF.
SET FOCUS‑POINT‑MODE SW TO AUTO.
AFTER CONFIRMING ABOVE, PRESS KEY [ Y ].
WHEN YOU RETURN TO FRONT MENU, PRESS KEY [ N ].
SET A WAVE‑LINE CENTER TO A GREEN LINE.
POSITION ADJUSTMENT OK. ‑
TO CCD POSITION MENU ‑ [ Z ]
***** CCD FOCUS ADJUSTMENTS *****
ADJUSTED WITHIN TOLERANCE.
[ 4 ] CCD FOCUS ADJUSTMENT
** CCD FOCUS ADJUSTMENT **
*: AF CHART NO1
[ 1 ]
FOCUS DATA= **
=
*
=