Pentax DS2 Operating Manual
  1. Manuals
  2. Brands
  3. Pentax Manuals
  4. Digital Camera
  5. DS2
  6. Operating manual
Pentax DS2 Operating Manual

Pentax DS2 Operating Manual

Slr digital camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SLR Digital Camera
Operating Manual
For optimum camera performance, please read
the Operating Manual before using the camera.

Advertisement

Table of Contents
loading

Related Manuals for Pentax DS2

Summary of Contents for Pentax DS2

  • Page 1 SLR Digital Camera Operating Manual For optimum camera performance, please read the Operating Manual before using the camera.
  • Page 2 Copyright Act, and care should be taken here also. Regarding trademarks • PENTAX and smc PENTAX are trademarks of PENTAX Corporation. • The SD logo is a trademark.

  • Page 3: For Safe Use Of Your Camera

    • If any irregularities occur during use, such as smoke or a strange odor, stop use immediately, remove the batteries or the AC adapter, and contact your nearest PENTAX service center. Continued use could cause a fire or electric shock.

  • Page 4: Precautions For Battery Usage

    Caution • Do not short the batteries or dispose of the batteries in fire. Do not disassemble the batteries. The batteries could explode or catch fire. • Do not charge any batteries other than rechargeable Ni-MH batteries. The batteries could explode or catch fire. Of the batteries that can be used in this camera, only the Ni-MH batteries can be recharged.
  • Page 5 Regarding Product Registration In order to better service you, we request that you complete the product registration, which can be found on the CD-ROM supplied with the camera or the PENTAX website. Thank you for your cooperation. Refer to the PENTAX PHOTO Browser 2.1/PENTAX PHOTO Laboratory 2.1...

  • Page 6: Table Of Contents

    Contents FOR SAFE USE OF YOUR CAMERA...1 ABOUT THE CAMERA...1 PRECAUTIONS FOR BATTERY USAGE ...2 Care to be Taken During Handling ...2 Contents ...4 Composition of the Operating Manual ...9 Before Using Your Camera U Camera Characteristics ... 12 Checking the Contents of the Package... 13 Names of Working Parts ...
  • Page 7 Basic Operations Basic Shooting Operation ... 42 Holding the Camera...42 Letting the Camera Choose the Optimal Settings ...43 Selecting the Appropriate Capturing Mode for Scenes... 47 Using the Zoom Lens ... 48 Using the Built-in Flash ... 49 Other Shooting Modes... 53 Continuous Shooting ...53 Self-Timer Shooting ...55 Remote Control Shooting (Remote Control F: Sold Separately) ...59...
  • Page 8 Menu Reference Using the Button Functions ... 92 Capture Mode ...92 Playback Mode ...94 Using the Menu ... 96 How to Operate the Menu...96 [A Rec. Mode] Menu Setting Items ...98 [Q Playback] Menu Setting Items ...98 [H Set-up] Menu Setting Items ...99 [A Custom Setting] Menu Setting Items...100 Using the Fn Menu ...
  • Page 9 Using the Built-in Flash ... 147 Compensating Flash Output ...147 Allowing Shooting while Charging Flash...148 Flash Characteristics in Each Exposure Mode ...148 Distance and Aperture when Using the Built-in Flash ...150 DA, D FA , FA J, FA and F Lens Compatibility with the Built-in Flash ...152 Using an External Flash (Optional)...154 Settings During Playback...
  • Page 10 Appendix Default Settings... 176 Functions Available with Various Lens Combinations ... 180 Notes on [Using Aperture Ring] ... 182 Cleaning the CCD... 183 Optional Accessories ... 185 Error Messages ... 188 Troubleshooting... 190 Main Specifications ... 192 Specifications for Remote Control F (Optional) ...195 Glossary...

  • Page 11: Composition Of The Operating Manual

    Composition of the Operating Manual This operating manual contains the following chapters. 1 Before Using Your Camera Explains camera characteristics, accessories and the names of various parts. 2 Getting Started Explains your first steps from purchasing the camera to taking pictures. Be sure to read it and follow the instructions.
  • Page 12 Memo...

  • Page 13: Before Using Your Camera

    Before Using Your Camera Check the package contents and names of working parts before use. U Camera Characteristics ...12 Checking the Contents of the Package ...13 Names of Working Parts ...14...

  • Page 14: U Camera Characteristics

    U Camera Characteristics • Features a 23.5×15.7 mm CCD with 6.1 million effective pixels for high precision and a wide dynamic range. • Features an AF sensor with 11 focusing points. The central 9 are wide cross area sensors. • Improved manual focusing using a viewfinder similar to a conventional 35 mm SLR camera, with 0.95×...

  • Page 15: Checking The Contents Of The Package

    (Installed on camera) I-USB17 I-VC28 Software (CD-ROM) Strap AA Alkaline batteries* S-SW43 O-ST10 (four) Operating Manual PENTAX PHOTO Browser 2.1/ PENTAX PHOTO Laboratory 2.1 (this manual) Operating Manual * The batteries packaged with the camera are for checking the camera's functionality.

  • Page 16: Names Of Working Parts

    Names of Working Parts Camera Lens mount index Shutter release button Main switch Self-Timer lamp/ Remote control receiver Lens unlock button 3 button button M button Q button Mirror AF coupler Focus mode lever Lens information contacts e-dial button Four-way controller 4 button { button...
  • Page 17 K button Mode dial Strap lug Cable switch terminal USB/Video terminal DC input terminal Terminal cover LCD monitor Built-in flash Hot shoe mc button LCD panel Diopter adjustment lever Card cover Card cover unlock lever Card access lamp Viewfinder...

  • Page 18: Lcd Monitor Indications

    LCD Monitor Indications The following indicators appear on the LCD monitor depending on the status of the camera. While Power is On or Operating Mode Dial Guides appear on the LCD monitor for 3 seconds when powered on or setting dial mode. Select [Off] for [Guide display] in [H Set-up] to not show indicators.
  • Page 19 Capture Mode Press the M button in capture mode to display the capture function settings on the LCD monitor for 15 seconds. Detailed Information Detailed Info Detailed Info Detailed Info AF.S AF.S AF.S ISO 800 ISO 800 sRGB sRGB sRGB 09 09 09 / / 25 25 2005...

  • Page 20: Playback Mode

    Playback Mode The camera switches screen displays every time you press M button during playback. You can change the information initially displayed by pressing the Q button. (p.161) Detailed Information 2000 2000 2000 F2 8 . 2 2 8 . ISO 800 ISO 800 sRGB...

  • Page 21: Histogram Display

    Histogram Display Capture quality (Image file type) Image folder number and file number (p.170) Protect icon (p.77) Histogram • Areas where blooming occurred blink if [Bright Portion] warning is on. (p.161) • Press the four-way controller (23) in the histogram display to move the Histogram display position up or down.

  • Page 22: Viewfinder Indications

    Viewfinder Indications Autofocus frame (p.39) Spot metering frame (p.131) Focus point (p.122) Flash status (p.49) Appears when flash is available and blinks when flash is recommended but not set. Picture mode icon (p.47) Icon for Picture mode in use appears. .
  • Page 23 EV compensation (p.142) Appears when EV compensation is available or in use. Blinks slowly when compensating flash output. Blinks quickly when compensating exposure and flash output. Adjusted value appears where number of recordable images is shown. Number of recordable images/EV compensation Show the number of recordable images with current quality and recorded pixel setting.

  • Page 24: Lcd Panel Indications

    LCD Panel Indications The following information appears in the LCD panel on top of the camera. Shutter speed (p.135) Aperture (p.137) Flash mode (p.49) : Built-in flash is ready (when blinking, flash should be used) : Flash off E : Auto discharge : Red-eye reduction flash on >...

  • Page 25: Getting Started

    Getting Started This chapter explains your first steps from purchasing the camera to taking pictures. Be sure to read it and follow the instructions. Attaching the Strap ...24 Inserting the Batteries ...25 Inserting/Removing the SD Memory Card ...29 Turning the Camera On and Off ...32 Initial Settings ...33 Attaching the Lens ...37 Adjusting the Viewfinder Diopter ...39...

  • Page 26: Attaching The Strap

    Attaching the Strap Pass the end of the strap through the strap lug, then secure on the inside of the clasp. Pass the other end of the strap through the other strap lug on the camera, then secure on the inside of the clasp.

  • Page 27: Inserting The Batteries

    Inserting the Batteries Insert batteries into the camera. Use two CR-V3 or four AA Ni-MH batteries, AA lithium batteries, or AA alkaline batteries. This camera is packaged with AA alkaline batteries for checking the camera's functionality but some other kinds of batteries are also compatible. Refer to for details on compatible batteries and when to use them.

  • Page 28: Batteries

    Press down on the batteries with the battery cover ( slide it as shown in the illustration ( • Use the AC adapter (optional) when using the camera for a prolonged period. (p.28) • Check the battery orientation if the camera does not operate properly after replacing the batteries.

  • Page 29: Battery Level Indicator

    ( 0°C) The still picture storage capacity is based on measuring conditions in accordance with CIPA standards and the playback time is based on PENTAX measuring conditions. Some deviation from the above figures may occur in actual use depending on shooting mode and shooting conditions.

  • Page 30: Using The Ac Adapter (Optional)

    Using the AC Adapter (Optional) We recommend using the AC adapter D-AC10 (optional) when using the LCD monitor for a long time or when connecting to your PC. Make sure the camera is turned off before opening the terminal cover. Connect the DC terminal on the AC adapter to the DC input terminal on the camera.

  • Page 31: Inserting/Removing The Sd Memory Card

    Inserting/Removing the SD Memory Card Captured images are recorded on the SD Memory Card. Make sure the camera is turned off before inserting or removing the SD Memory Card (market product). • Do not remove the SD Memory Card while card access lamp is lit. •...
  • Page 32 • Avoid using or storing the card in direct sunlight or where it may be exposed to rapid changes in temperature or to condensation. • For information on compatible SD Memory Card, visit the PENTAX website or contact your nearest PENTAX customer service center.

  • Page 33: Recorded Pixels And Quality Level

    Recorded Pixels and Quality Level Choose the number of pixels (size) and quality level (data compression rate) of pictures according to how you intend to use the pictures you have taken. Pictures with larger recorded size or the more E are clearer when printed. The number of pictures that can be taken (the number of pictures that can be recorded on an SD Memory Card) becomes less with larger file sizes.

  • Page 34: Turning The Camera On And Off

    Turning the Camera On and Off Move the main switch to [ON] position. The camera will turn on. Move the main switch to [OFF] position to turn off the camera. • Always turn the camera off when not in use. •...

  • Page 35: Initial Settings

    Initial Settings The first time the camera is turned on after purchasing, the “Initial Settings” screen appears on the LCD monitor. Follow the procedure below to set the language displayed on the LCD monitor and the current date and time. Once setting is done, these will not need to be set again when turning your camera on.
  • Page 36 Press the four-way controller (3). The cursor moves to [W]. Press the four-way controller (45) to select the city. Press the four-way controller (3). The cursor moves to DST (daylight saving time). Use the four-way controller (45) to select (Off). Press the 4 button.

  • Page 37: Setting The Date And Time

    Setting the Date and Time Set the current date and time and the display style. Press the four-way controller (5). The frame moves to [mm/dd/yy]. Use the four-way controller (23) to choose the date style. Press the four-way controller (5). The frame moves to [24h].
  • Page 38 Press the four-way controller (5). The frame moves to the month. Use the four-way controller (23) to set the month. Set the day and year in the same manner. Next, set the time. If you select [12h] in Step 4, the setting switches between am and pm depending on the time.

  • Page 39: Attaching The Lens

    Attaching the Lens All camera exposure modes are available when using DA, D FA, FA J or other lenses with Aperture s (Auto) position. Some functions are restricted when lenses are not set to Aperture s (Auto). Also see “Notes on [Using Aperture Ring]”...
  • Page 40 Remove the front lens cap by pushing the indicated portions inward. To detach the lens, hold down the lens unlock button ( counterclockwise. • The body mount cover ( when shipped. “Body Mount Cap K” is sold separately and has a lock function.

  • Page 41: Adjusting The Viewfinder Diopter

    Adjusting the Viewfinder Diopter Adjust the viewfinder to suit your eyesight. If it is difficult to see the viewfinder image clearly, slide the diopter adjustment lever sideways. You can slide the diopter from –2.5m Look through the viewfinder and point the camera at a well- lit scene.
  • Page 42 Memo...

  • Page 43: Basic Operations

    Basic Operations This chapter explains basic operations for shooting by setting mode dial to Picture mode (Auto Picture or Normal mode - Flash OFF mode) to ensure successful capturing. For information about advanced functions and settings for taking pictures, refer to chapter 4 and onward. Basic Shooting Operation ...42 Selecting the Appropriate Capturing Mode for Scenes ...47...

  • Page 44: Basic Shooting Operation

    Basic Shooting Operation Holding the Camera How you hold the camera is important when taking pictures. • Hold the camera firmly with both hands. • Press the shutter release button gently when taking a picture. Horizontal position • To reduce camera shake, support your body or the camera on a solid object such as a table, tree, or wall.

  • Page 45: Letting The Camera Choose The Optimal Settings

    Letting the Camera Choose the Optimal Settings How to set the camera so it will choose the optimum settings based on the subject lighting, distance and motion. Set the mode dial to I. The camera will select the optimal capturing mode for the subject. 1Selecting the Appropriate Capturing Mode for Scenes (p.47) Set the focus mode lever to...
  • Page 46 Turn the zoom ring to determine the size of the subject. Determine the size of the subject. 1Using the Zoom Lens (p.48) Position the subject inside the autofocus frame and press the shutter release button halfway. The autofocus system operates. The focus indicator ] appears in the viewfinder when the subject is in focus.

  • Page 47: Lcd Monitor

    Review captured images on the LCD monitor. Image displays for 1 second on the LCD monitor after capturing (Instant Review.) You can delete the image during Instant Review by pressing the i button. 1Setting the Display Time (p.171) 1Deleting Images (p.73) 1Displaying Bright Portion Warning (p.161) Operating the shutter release button...
  • Page 48 Hard-to-Autofocus Subjects The autofocus mechanism is not perfect. Focusing may be difficult when taking pictures under the following conditions ((a) to (f) below). These also apply to manual focusing using the focus indicator ] in the viewfinder. If the subject cannot be focused automatically, set the focus mode lever to \ and use the manual focus mode to focus on the subject with the aid of the matte field in the viewfinder.

  • Page 49: Selecting The Appropriate Capturing Mode For Scenes

    Selecting the Appropriate Capturing Mode for Scenes The camera selects and set the optimum mode when I (Auto Picture) on the mode dial is set to the dial indicator. Select U (Normal), = (Portrait), s (Landscape), q (Macro), \ (Moving Object), .

  • Page 50: Using The Zoom Lens

    Using the Zoom Lens Enlarge the subject (telephoto) or capture a wider area (wide angle) with a zoom lens. Adjust it to the desired size and take the picture. Turn the zoom ring to the right or left. Turn the zoom ring clockwise for telephoto and counterclockwise for wide angle.

  • Page 51: Using The Built-In Flash

    Using the Built-in Flash Use the following procedures to take a picture in low light or backlit conditions or when you want to manually use the built-in flash. The built-in flash is optimum at about 0.7 m to 4 m from the subject. Exposure will not be properly controlled and vignetting may occur when used at a distance closer than 0.7 m (this distance varies slightly depending on the lens being used and set sensitivity (p.150)).

  • Page 52: Selecting Flash Mode

    Selecting Flash Mode Press the { button. The Fn menu appears. Press the four-way controller (3). The flash options screen appears. When the mode dial is set to e, b, c, a or p, B and C appear gray and cannot be selected.
  • Page 53 Switch between Auto discharge mode and Manual discharge mode (Flash ON) by pressing the K button while the built-in flash is popped up. If Auto discharge is set, E appears on the LCD panel. Press the shutter release button fully. The picture is taken.
  • Page 54 Using Red-eye Reduction Flash “Red-eye” is the phenomenon where eyes look reddish in photographs taken in dark environments with a flash. This is caused by the reflection of the electronic flash in the retina of the eye. Red-eye occurs because pupils are dilated in dark environments.

  • Page 55: Other Shooting Modes

    Other Shooting Modes Continuous Shooting Pictures can be taken continuously while the shutter release button is held down. Press the { button. The Fn menu appears. AUTO AUTO AUTO Exit Exit Exit...
  • Page 56 Press the four-way controller (2). The Drive Mode options screen appears. Use the four-way controller (45) to select j. Press the 4 button twice. The camera is ready to take pictures. Press the shutter release button halfway. The autofocus system operates. The focus indicator ] appears in the viewfinder when the subject is in focus.

  • Page 57: Self-Timer Shooting

    Set [2 No. cnt shtng rcd im ] in [Recordable Image No.] of the [A Custom Setting] menu. The number of continuously recordable images (buffer space) appears when shutter is pressed halfway. (p.100) Press the shutter release button fully. Pictures are taken continuously while the shutter release button is fully pressed.
  • Page 58 Press the { button. The Fn menu appears. Press the four-way controller (2). AUTO AUTO AUTO Exit Exit Exit...
  • Page 59 The Drive Mode options screen appears. Use the four-way controller (45) to select g or Z. Press the 4 button twice. The camera is ready to take pictures. Confirm in the viewfinder that the subject you wish to shoot is in the display and press the shutter release button halfway.
  • Page 60 Press the shutter release button fully. For g, the self-timer lamp starts blinking slowly and blinks rapidly 2 seconds before the shutter is released. The beep is heard and the rate increases. The shutter will be released about 12 seconds after the shutter release button is pressed fully.

  • Page 61: Remote Control Shooting (Remote Control F: Sold Separately)

    Remote Control Shooting (Remote Control F: Sold Separately) The shutter can be released with the optional remote control unit. You can select from h (remote control) and i (three-second delay) for remote control shooting. The shutter will be released immediately after the shutter release button on the remote control unit is pressed.
  • Page 62 Press the four-way controller (2). The Drive Mode options screen appears. Use the four-way controller (45) to select h or i. The self-timer lamp will blink to let you know that the camera is in remote control wait status. Press the 4 button twice. The camera is ready to take pictures.
  • Page 63 5 minutes. • The remote control unit battery can send a remote control signal about 30,000 times. Contact PENTAX service center to replace the battery (this will involve a fee). by pulling one side out and toward you when using...

  • Page 64: Using Mirror Lock Up Function To Prevent Camera Shake

    Using Mirror Lock Up Function to Prevent Camera Shake Use the Mirror Lock Up function if camera shake is evident even when Cable Switch (optional) or Remote Control Unit (optional) is used. When shutter release button is pressed, mirror pops up and shutter is released 2 seconds later if 2 sec.

  • Page 65: Playing Back Still Pictures

    Playing Back Images You can play back captured still pictures with the camera. Use the included “PENTAX PHOTO Browser 2.1” software to play back using a PC. Refer to the “PENTAX PHOTO Browser 2.1/PENTAX PHOTO Laboratory 2.1 Operating Manual” for details.

  • Page 66: Rotating Images

    Press the four-way controller (45). 4 : The previous image appears. 5 : The next image appears. Rotating Images You can rotate images 90° counterclockwise at a time. Make images shot vertically easier to view. 100-0001 100-0001 100-0001 Press the Q button after taking a picture.

  • Page 67: Enlarging Playback Images

    Press the 4 button. Image rotation information is saved. Enlarging Playback Images You can magnify images up to 12 times when displaying. Press the Q button and use the four-way controller (45) to select an image. The most recently captured image (image with the largest file number) is displayed first on the LCD monitor.

  • Page 68: Nine-Image Display

    Turn the e-dial to the right (toward y). Image enlarges at each calibration and can be enlarged to 12 times the original. Turn to the left (toward f) to return. Press the 4 button to return to the original size. Press four-way controller (2345) in zoom display to change the display area.
  • Page 69 Press the Q button. The most recently captured image (image with the largest file number) is displayed on the LCD monitor. Turn the e-dial to the left (toward f). Up to nine thumbnail images will be displayed at once. Use the four-way controller (2345) to select an image.

  • Page 70: Slideshow

    Slideshow You can play back all images recorded on your SD Memory Card successively. To start continuous playback, use the menu screen displayed on the LCD monitor. Press the Q button and use the four-way controller (45) to select an image to be displayed first.
  • Page 71 Press the four-way controller (5). Start screen is displayed and slideshow begins. Press any button to end slideshow. Press the shutter release button or the Q button, slide the main switch to | (preview) or turn the mode dial to change to Capture mode.

  • Page 72: Connecting The Camera To Av Equipment

    Connecting the Camera to AV Equipment By using the video cable, you can play back images using a TV or other device with a video IN jack as your monitor. Make sure that both the TV and the camera are turned off before connecting the cable. 1Selecting the Video Output Format (p.169) Open the terminal cover and connect the video cable to the USB/Video terminal.

  • Page 73: Processing Images With Filters

    Processing Images with Filters You can edit shot images using digital filters. Processed images are saved under a different name. • RAW images cannot be processed using the digital filter. • Additionally, set digital filters from the [Q Playback] menu. Digital Filter B&W Convert to a black and white image.
  • Page 74 Press the four-way controller (4). The screen for selecting the filter appears. Use the four-way controller (45) to select an image. Use the four-way controller (23) to select a filter. Select a filter and preview the effects on the image. Proceed to Step 6 if [B&W] or [Sepia] is selected.

  • Page 75: Deleting Images

    Deleting Images Deleting a Single Image You can delete one image at a time. • Deleted images cannot be restored. • Protected images cannot be deleted. Press the Q button and use the four-way controller (45) to select an image to delete. Press the i button.

  • Page 76: Deleting All Images

    Deleting All Images You can delete all saved images at once. • Deleted images cannot be restored. • Protected images cannot be deleted. Press the Q button. Press the i button twice. The Delete All screen appears. Use the four-way controller (2) to select [Delete All].

  • Page 77: Deleting Selected Images (From Nine-Image Display)

    Deleting Selected Images (from Nine-Image Display) You can delete multiple images from the nine-image display at once. • Deleted images cannot be restored. • Protected images cannot be deleted. • Only files in the same folder can be selected at once. Press the Q button.
  • Page 78 Press the i button. 9 appears above the images. Use the four-way controller (2345) to move to the images to delete and press the 4 button. Image is selected and O appears. Press { button to select all images (the selection of images may take time to complete depending on the number of images).

  • Page 79: Protecting Images From Deletion (Protect)

    Protecting Images from Deletion (Protect) You can protect images from being accidentally deleted. Even protected images are deleted if the SD Memory Card is formatted. Press the Q button and use the four-way controller (45) to select an image. The most recently captured images (image with the largest file number) are displayed first on the LCD monitor.

  • Page 80: Protecting All Images

    Protecting All Images Press the Q button. Press the Z button twice. The Protect all images screen appears. Press the four-way controller (2) to select [Protect] and press the 4 button. All images saved in the SD Memory Card are protected. Select [Unprotect] in Step 3 to cancel the Protect setting on all of the images.

  • Page 81: Setting The Printing Service (Dpof)

    Setting the Printing Service (DPOF) You can order conventional photograph prints by taking the SD Memory Card with recorded images to a store for a printing service. DPOF (Digital Print Order Format) settings allow you to specify the number of copies or to imprint the date. DPOF settings cannot be applied to RAW images.
  • Page 82 Use the four-way controller (45) to choose the number of copies and press the four-way controller (3). The frame moves to [Date]. Use the four-way controller (45) to choose whether to insert the date (O) or not (P). O : The date will be imprinted. P : The date will not be imprinted.

  • Page 83: Settings For All Images

    Settings for All Images Press the { button in Playback mode. The Fn menu appears. Press the four-way controller (2). The DPOF screen appears. Press the { button. The screen for making DPOF settings for all images appears. Use the four-way controller (45) to choose the number of copies and whether to insert the date (O) or not (P).
  • Page 84 Press the 4 button. The DPOF settings for all the images are saved and the camera returns to playback status. The number of copies specified in settings for all images applies to all the images. Before printing, check that the number is correct. Settings for single images are canceled when settings are made for all images.

  • Page 85: Printing Using Pictbridge

    Make the settings on the printer. For details, refer to the operating manual for your printer. • RAW images cannot be printed directly. Use a PC to print RAW images. • See the “PENTAX PHOTO Browser 2.1/PENTAX PHOTO Laboratory 2.1 Operating Manual” when connecting to a PC.

  • Page 86: Setting [Transfer Mode]

    Setting [Transfer Mode] Press the 3 button. The [A Rec. Mode] menu appears. Use the four-way controller (45) to select the [H Set-up] menu. Use the four-way controller (23) to select [Transfer Mode]. Press the four-way controller (5). A pop-up menu appears. Set-up Format Beep...

  • Page 87: Connecting The Camera To The Printer

    Use the four-way controller (23) to select [PictBridge]. Press the 4 button. The setting is changed. Press the 3 button. Connecting the Camera to the Printer Turn the camera off. Connect the camera and PictBridge compatible printer using the USB cable supplied with the camera. The PictBridge logo is displayed on PictBridge compatible printers.

  • Page 88: Printing Single Images

    Turn the printer on. After printer start-up is complete, turn the camera on. The PictBridge menu appears. PictBridge menu is not displayed if [Transfer Mode] is set to [PC] or [PC-F]. Printing Single Images Use the four-way controller (23) to select [Print One] on the PictBridge menu.
  • Page 89 Use the four-way controller (23) to choose the number of copies. You can print up to 99 copies. Use the { button to choose whether to insert the date (O) or not (P). O : The date will be printed. P : The date will not be printed.

  • Page 90: Printing All Images

    Press the 4 button. Repeat Steps 8 to 10 to set [Paper Type], [Quality] and [Border Status]. The print settings change screen appears after each item has been set. When the Paper Size is set to [Standard], images are printed according to the printer settings.
  • Page 91 Choose the number of copies and whether to imprint the date or not. The number of copies and the date setting that you choose apply to all of the images. Refer to Steps 4 and 5 of “Printing Single Images” (p.87) for details on how to make the settings.

  • Page 92: Printing Images Using The Dpof Settings

    Printing Images Using the DPOF Settings Use the four-way controller (23) to select [DPOF AUTOPRINT] on the PictBridge menu. Press the 4 button. The Print w/DPOF settings screen appears. Use the four-way controller (45) to check the number of copies for each image, whether the date is imprinted or not, and total number of copies.

  • Page 93: Menu Reference

    Menu Reference Explains the functions of U by buttons and menus. Using the Button Functions ...92 Using the Menu ...96 Using the Fn Menu ...102 Using the Mode Dial ...104 When using menus and Fn menu, items which cannot be changed due to camera settings appear gray and cannot be selected.

  • Page 94: Using The Button Functions

    Using the Button Functions Capture Mode Functions of buttons used during shooting are noted. Shutter release button Press to capture images. (p.45) Main switch Move to turn the power on/off (p.32) and confirm the depth of field (Preview) (p.130). Lens unlock button Press to detach lens.

  • Page 95: Mode Dial

    Focus mode lever Switches between Autofocus mode (p.118) and Manual focus mode (p.126). Mode dial Changes the Shooting mode. (p.104) K button Press to pop up the built-in flash. (p.49) 3 button Displays the [A Rec. Mode] menu (p.98). Next, press the four-way controller (5) to display [Q Playback] menu (p.98), [H Set-up] menu (p.99) and [A Custom Setting] menu.

  • Page 96: Playback Mode

    Playback Mode Functions of buttons used during playback are noted. Shutter release button Press to switch to capture mode. Main switch Move to turn the camera on and off. (p.32) 3 button Press to display the [Q Playback] menu (p.98). Next, press the four- way controller (45) to display [H Set-up] menu (p.99), [A Custom Setting] menu (p.100) and [A Rec.
  • Page 97 M button Press to show shooting information on the LCD monitor. (p.18) Q button Press to switch to capture mode. Z button Press to protect images from being accidentally erased. (p.77) e-dial Uses it to enlarge an image (p.65) or display nine images at the same time (p.66).

  • Page 98: Using The Menu

    Using the Menu How to Operate the Menu This section explains operation methods for [A Rec. Mode] menu, [Q Playback] menu, [H Set-up] menu and [A Custom Setting] menu. Displaying the Menu screen Press the 3 button in Capture mode. The [A Rec.
  • Page 99 Select a menu item and set Procedure to set the [Quality Level] on the [A Rec. Mode] menu is explained as an example. Use the four-way controller (23) to choose an item. Press the four-way controller (5). Available [Quality Level] options appear.

  • Page 100: [A Rec. Mode] Menu Setting Items

    [A Rec. Mode] Menu Setting Items Perform settings related to capturing in the [A Rec. Mode] menu. Item Image Tone Recorded Pixels Quality Level Saturation Sharpness Contrast Instant Review Auto Bracket AE Metering Swtch dst msr pt AF Mode Flash Exp. Comp. [Q Playback] Menu Setting Items Perform settings related to playback and editing images in the [Q Playback] menu.

  • Page 101: [H Set-Up] Menu Setting Items

    CCD. Resets all settings other than Date Adjust, Reset Language, Video Out and World Time. Refer to p.13 of the “PENTAX PHOTO Browser 2.1/PENTAX PHOTO Laboratory 2.1 Operating Manual” for details on connecting the camera to a Function Page p.163 p.164...

  • Page 102: [A Custom Setting] Menu Setting Items

    [A Custom Setting] Menu Setting Items Set custom functions to fully use the functions of a SLR camera with the Custom Function Menu. The default setting does not use Custom Function. [A Custom Setting] menu settings are activated when [Setting], the first item, is O (on).
  • Page 103 Item Sets to enable focus indicator when screw mount lens is in use. FI with S lens used Lens is recognized even when lens is not attached to the camera when enabled. Sets to enable shutter release when lens Using aperture ring aperture ring is set at other than s.

  • Page 104: Using The Fn Menu

    Using the Fn Menu Capture Mode Press the { button while taking a picture. The Fn menu appears. Press the four-way controller (2345) to set the operation. Four-way controller Drive Mode Flash Mode White Balance Sensitivity Item Selects Continuous shooting, Self- Timer, Remote control or Auto bracket.

  • Page 105: Playback Mode

    Playback Mode Press the { button during playback. The Fn menu appears. Press the four-way controller (245) to set the operation. Four-way Item controller DPOF Settings Digital Filter Slideshow Function Sets the DPOF settings. Edits captured images to black and white or sepia tint, or adds softening and slimming effects.

  • Page 106: Using The Mode Dial

    Using the Mode Dial You can switch the Shooting mode by setting the icons on the mode dial to the dial indicator. Item I (Auto Picture) (Normal) (Portrait) (Landscape) (Macro) (Moving Object) (Night Scene Portrait) (Flash OFF) For . (Night Scene Portrait), the shutter speed becomes slower in dark places, even if the built-in flash is used.
  • Page 107 Item Automatically sets shutter speed and aperture e (Program) to the proper exposure when taking pictures. Lets you set the desired shutter speed for expressing the motion of moving subjects. (Shutter Priority) Take pictures of fast moving subjects that look still or subjects that give a sense of movement.
  • Page 108 Memo...

  • Page 109: Function Reference

    Function Reference Introduces functions to further enhance your U experience. Setting the Recorded Pixels and Quality Level ...108 Focusing ...118 Setting the Exposure ...128 Using the Built-in Flash ...147 Settings During Playback ...161 Camera Settings ...163 Resetting to Default Settings ...172...

  • Page 110: Setting The Recorded Pixels And Quality Level

    Setting the Recorded Pixels and Quality Level Setting the Image Tone Set the basic color tone of pictures. The default setting is F (Bright). Bright Natural Set in [Image Tone] in the [A Rec. Mode] menu. (p.98) Rec. Mode Image Tone Recorded Pixels Quality Level Saturation...

  • Page 111: Setting The Recorded Pixels

    Setting the Recorded Pixels You can select the number of recorded pixels from P (3008×2008/ 3008×2000), Q (2400×1600) and R (1536×1024). The more pixels there are, the larger the picture and the bigger the file size. The file size will also differ according to quality level settings. The default setting is P (3008×2000).

  • Page 112: Setting The Quality Level

    Effects such as White Balance, Contrast, Saturation and Sharpness are not applied to the image but such information is saved. Transfer to a PC, apply effects with the enclosed PENTAX PHOTO Laboratory 2.1 and create JPEG and TIFF images. Lowest compression rate, suited for printing large pictures such as A4 size.

  • Page 113: Setting The Saturation/Sharpness/Contrast

    Setting the Saturation/Sharpness/Contrast Select from five levels of Saturation, Sharpness and Contrast. The default setting is [0 (Standard)] for all. Saturation Sets the color saturation. Sharpness Makes the image outlines sharp or soft. Contrast Sets the image contrast. Set [Saturation], [Sharpness] and [Contrast] in the [A Rec. Mode] menu. (p.98) Settings cannot be changed in Picture mode (p.47).

  • Page 114: Setting The White Balance

    Setting the White Balance The color of the subject changes with the light source. For example, the same white object will be a different shade of white in daylight than under a light bulb. In cameras using film, this is adjusted by changing the film or using filters.

  • Page 115: Color Temperature

    Color Temperature The color of light shifts towards blue as the color temperature rises, and towards red as the color temperature falls. Color temperature describes this change in light color in terms of absolute temperature (K: Kelvin). This camera is capable of setting the white balance to enable taking pictures with natural coloring under a variety of lighting conditions.
  • Page 116 Use the four-way controller (3) to select K (Manual). Press the four-way controller (5). The message screen appears. Fully display a white or gray sheet of paper in the viewfinder under the light to adjust white balance. Press the shutter release button fully. Slide the focus mode lever to \ when the shutter cannot be released.

  • Page 117: Setting The Sensitivity

    Setting the Sensitivity You can set the sensitivity to suit the brightness of the surroundings. The sensitivity can be set to [AUTO] or within a sensitivity range equivalent to ISO 200 to 3200. The default setting is [AUTO]. Set [Sensitivity] in the Fn menu. (p.102) AUTO AUTO AUTO...
  • Page 118 Sensitivity is not corrected in the following. • Exposure mode is a (Manual) or p (Bulb) mode • Flash is discharged • Auto bracketing • EV Compensation ISO Sensitivity Warning Display ISO Sensitivity Warning appears in the viewfinder when a sensitivity value of your choice is reached or exceeded.

  • Page 119: Setting The Color Space

    Setting the Color Space You can set the color space to use. The default setting is [1 sRGB]. Sets to sRGB color space. sRGB Sets to AdobeRGB color space. AdobeRGB Set in [Color Space] in the [A Custom Setting] menu. (p.101) Color Space sRGB AdobeRGB...

  • Page 120: Focusing

    Focusing You can focus with the following methods. Autofocus Manual focus Select the focusing area in the viewfinder (focus point) from [Auto], [Select] and [Center]. (p.122) Using the Autofocus You can choose the autofocus mode from l (Single mode) where the shutter release button is pressed halfway to focus on the subject and the focus is locked at that position, and k (Continuous mode) where the subject is kept in focus by continuous adjustment while the shutter release...
  • Page 121 Look through the viewfinder and press the shutter release button halfway. The focus indicator ] appears in the viewfinder when focused (if it is blinking, the subject is not in focus). 1 Hard-to-Autofocus Subjects (p.46) • In l (Single mode), the focus is locked (focus lock) while ] is lit. To focus on another subject, take your finger off the shutter release button first.
  • Page 122 Use the 4 Button to Focus on the Subject You can set the camera so that the focusing is not performed when the shutter release button is pressed halfway and is performed when the 4 button is pressed. This is useful when you wish to temporarily use autofocus while using manual focus.

  • Page 123: Setting The Af Mode

    Setting the AF Mode You can choose from the following two autofocus modes. The default setting is l (Single mode). When the shutter release button is pressed halfway to Single mode focus on the subject, the focus is locked at that position. Continuous The subject is kept in focus by continuous adjustment mode...

  • Page 124: Selecting The Focusing Area (Focus Point)

    Selecting the Focusing Area (Focus Point) Choose the part of the viewfinder to set focus to. The default setting is N (Auto). The selected focus point lights red in the viewfinder. Auto Select Center Set in [Swtch dst msr pt] in the [A Rec. Mode] menu (p.98). Rec.
  • Page 125 Setting the Focus Position in the Viewfinder Select S (Select) in [Swtch dst msr pt] in the [A Rec. Mode] menu. Look through the viewfinder and check the position of the subject. Use the four-way controller (2345) to select the desired focus point.

  • Page 126: Fixing The Focus (Focus Lock)

    Fixing the Focus (Focus Lock) If the subject is outside the range of the focusing area, the camera cannot automatically focus on the subject. In this situation, you can aim the focusing area toward the subject, use focus lock and recompose the picture.
  • Page 127 Re-compose the picture while keeping the shutter release button pressed halfway. • The focus is locked while the focus indicator ] is lit. • Turning the zooming ring in focus lock mode may cause the subject to be out of focus. •...

  • Page 128: Adjusting The Focus Manually (Manual Focus)

    Adjusting the Focus Manually (Manual Focus) When you adjust the focus manually, you can either check with the focus indicator in the viewfinder or use the viewfinder matte field to adjust focus. Using the Focus Indicator You can manually adjust the focus using the focus indicator ]. Set the focus mode lever to Look through the viewfinder, press the shutter release...
  • Page 129 • Use the matte field in the viewfinder when the subject is difficult to focus (p.46) and the focus indicator will not stay lit. • The beep can be turned off. (p.164) Using the Viewfinder Matte Field You can manually adjust the focus using the viewfinder matte field. Set the focus mode lever to Look through the viewfinder and turn the focusing ring until...

  • Page 130: Setting The Exposure

    Setting the Exposure Effect of Aperture and Shutter Speed Correct exposure of the subject is determined by the combination of shutter speed and aperture setting. There are many correct combinations of shutter speed and aperture for a particular subject. Different combinations produce different effects.

  • Page 131: Depth Of Field

    Effect of Aperture Adjust the amount of light hitting the CCD by changing the aperture. Opening the aperture (reduce the aperture value) Objects closer and farther than the focused subject will be more out of focus. For instance, if you take a picture of flower against a landscape with the aperture open, the landscape in front and behind the flower will be blurred, emphasizing only the flower.

  • Page 132: How To Check Depth Of Field

    How to Check Depth of Field When you focus on a portion of the subject, there is a range in which object closer and farther will also be in focus. This focused range is called the depth of field. If you use Depth of Field confirmation, you can check the depth of field in the viewfinder before taking a picture.

  • Page 133: Selecting The Metering Method

    Selecting the Metering Method Choose the part of the screen to use for measuring brightness and determining exposure. L (Multi-segment metering), M (Center-weighted metering) or N (Spot metering) mode can be selected. The default setting is L (Multi-segment metering). Multi-segment Segment the screen in 16 parts, meter each portion and metering determine the appropriate exposure.

  • Page 134: Using The Spot Metering

    Linking AF Point and AE During Multi-Segmented Metering In [Link AF Point and AE] (p.100) of the [A Custom Setting] menu, you can link the exposure and focus point during multi-segment metering. The default setting is [1 Off]. Using the Center-Weighted Metering Metering is weighted at the center of the screen.

  • Page 135: Changing The Exposure Mode

    Setting the Meter Operating Time Set the metering time in [Meter Operating Time] in the [A Custom Setting] menu (p.100). The default setting is [1 10sec]. 10sec Metering time is set to 10 seconds. 3sec Metering time is set to 3 seconds. 30sec Metering time is set to 30 seconds.
  • Page 136 Using the e (Program) Mode Shutter speed and aperture value are automatically set for taking pictures at the proper exposure. Perform the following to adjust the exposure. Set the mode dial to e. Turn the e-dial while pressing the mc button and adjust the exposure.

  • Page 137: Shutter Speed

    Using the b (Shutter Priority) Mode Set a proper shutter speed and use to express moving subjects. Set the shutter speed faster and capture fast moving subjects as if they are still or slow down the shutter and capture lively images. Aperture value is automatically set to appropriate exposure depending on the shutter speed.

  • Page 138: Exposure Warning

    • Turn the e-dial while pressing the mc button and change the EV Compensation value. (p.142) • Set the shutter speed in increments of 1/2 EV or 1/3 EV. Set in [Expsr Setting Steps] in the [A Custom Setting] menu. (p.143) •...

  • Page 139: Aperture Value

    Using the c (Aperture Priority) Mode Set a proper aperture and use when you want to adjust the depth of field. The depth of field is deeper and the front and back of the focused object is clear when aperture is set to a large value. The depth of field is shallower and the front and back of the focused object is blurred when aperture is set to a small value.
  • Page 140 • Turn the e-dial while pressing the mc button and change the EV Compensation value. (p.142) • Set the aperture value in increments of 1/2 EV or 1/3 EV. Set in [Expsr Setting Steps] in the [A Custom Setting] menu. (p.143) •...
  • Page 141 Using a (Manual) Mode You can set the shutter speed and aperture value. This mode is suitable to take pictures of your choice by combining them. This mode is convenient for taking pictures using the same shutter speed and aperture setting combination or taking intentionally under-exposed (darker) or over- exposed (brighter) photographs.
  • Page 142 The shutter speed and aperture value are displayed in the viewfinder and on the LCD panel. Of the shutter speed and aperture, the value being adjusted is underlined in the viewfinder. While adjusting the shutter speed or aperture value, the difference with the appropriate exposure (EV value) appears at the bottom right of the viewfinder.
  • Page 143 About the L Button The aperture and shutter speed are automatically adjusted to the appropriate exposure at that moment if the L button is pressed in a (Manual) mode. You can choose from the following three adjustment methods in [AE-L bttn on M expsr] in the [A Custom Setting] menu.

  • Page 144: Setting The Exposure

    Setting the Exposure This allows you to deliberately over-expose (brighten) or under-expose (darken) your picture. You can adjust the EV Compensation from –2 to +2 (EV) in increments of 1/2 EV or 1/3 EV. Set in [Expsr Setting Steps] in the [A Custom Setting] menu. (p.143) Set the compensation with the e-dial while the mc button is pressed.

  • Page 145: Recording The Exposure Before Shooting (Ae Lock)

    Changing the Exposure Setting Steps Set Exposure Setting Steps in [Expsr Setting Steps] in [A Custom Setting] to increments of 1/2 EV or 1/3 EV. Expsr Setting Steps 1/2 EV Steps 1/3 EV Steps Exposure setting steps are set to 1/2 EV Recording the Exposure Before Shooting (AE Lock) AE Lock is a function that memorizes the exposure prior to taking the picture.

  • Page 146: Changing The Exposure And Shooting (Auto Bracket)

    Changing the Exposure and Shooting (Auto Bracket) You can take continuous pictures with different exposure when the shutter release button is pressed. The first frame is exposed with no compensation, the second frame is under-exposed (negative compensation) and the third is over-exposed (positive compensation). Normal exposure Press the { button in capture mode.
  • Page 147 Press the 4 button twice. Shooting is ready and ] is displayed on the LCD panel. Press the shutter release button halfway. Focus indicator ] appears in the viewfinder when focused. Press the shutter release button fully. Three continuous pictures will be taken, the first with no compensation, the second with negative compensation, and the third with positive compensation.

  • Page 148: Setting Auto Bracket

    Setting Auto Bracket Change the shooting order and steps of Auto Bracket. Bracketng amount (Step interval) Shooting images * Set interval of steps in [Expsr Setting Steps] in the [A Custom Setting] menu. (p.143) Set in [Auto Bracket] in the [A Rec. Mode] menu. (p.98) Auto Bracket Bracketng amount Shooting images...

  • Page 149: Using The Built-In Flash

    Using the Built-in Flash Compensating Flash Output You can change the flash output in a range of –2.0 to +1.0. The Flash Compensation values are as follows for 1/2 EV and 1/3 EV. Step interval 1/2 EV –2.0, –1.5, –1.0, –0.5, 0.0, +0.5, +1.0 1/3 EV –2.0, –1.7, –1.3, –1.0, –0.7, –0.3, 0.0, +0.3, +0.7, +1.0 * Set interval of steps in [Expsr Setting Steps] in the [A Custom Setting] menu.

  • Page 150: Allowing Shooting While Charging Flash

    Allowing Shooting while Charging Flash You can set to enable shooting while flash is being charged. Set [2 On] for [Release when Chrging] in the [A Custom Setting] menu (p.101). Pictures cannot be taken while the flash is charging by default. Release when Chrging Enables shutter release while the built-in...
  • Page 151 Using Slow-Speed-Sync You can use slow-speed-sync when shooting portraits with the sunset in the background. Both the portrait and the background are captured beautifully. • Slow-speed-sync slows the shutter speed. Use a tripod to avoid camera shake. The picture will also blur if the subject moves. •...

  • Page 152: Distance And Aperture When Using The Built-In Flash

    Distance and Aperture when Using the Built-in Flash A set criteria is necessary between the guide number, aperture and distance when shooting with the flash. Calculate and adjust the shooting conditions if flash is not sufficient. Built-in flash guide number Sensitivity Built-in flash guide number ISO 200...
  • Page 153 Calculating Aperture Value from Shooting Distance The following equation calculates the aperture value for shooting distances. Aperture Value Used F = Guide number ÷ Shooting distance When sensitivity is [ISO 200] and shooting distance is 5.2 m, aperture value is: F = 15.6 ÷...

  • Page 154: Da, D Fa , Fa J, Fa And F Lens Compatibility With The Built-In Flash

    DA, D FA , FA J, FA and F Lens Compatibility with the Built-in Flash When using DA, D FA, FA J, FA and F lenses with the U without the hood, built-in flash compatibility is shown below. Yes : Available : Available depending on other factors No : Unavailable due to vignetting Following are evaluated without a hood.
  • Page 155 Lens Name FA 80-200 mm F2.8ED (IF) FA80-320 mm F4.5-5.6 FA80-200 mm F4.7-5.6 FA100-300 mm F4.7-5.8 FA 250-600 mm F5.6ED (IF) DA14 mm F2.8ED (IF) FA20 mm F2.8 FA 24 mm F2AL (IF) FA28 mm F2.8AL FA31 mm F1.8AL Limited FA35 mm F2AL DA40 mm F2.8 Limited FA43 mm F1.9 Limited...

  • Page 156: Using An External Flash (Optional)

    Using an External Flash (Optional) Using the optional external flash AF360FGZ enables a variety of flash modes, such as P-TTL auto flash mode, high-speed flash sync mode, and wireless mode. See the chart below for details. (Yes: Available #: Restricted No: Not available) * When using an external flash, it is recommended to use the high-precision AF360FGZ, as it is capable of P-TTL auto flash mode.
  • Page 157 About the LCD Panel Display for AF360FGZ The AF360FGZ will automatically convert the field angle differential between 35 mm format and the U depending on the focal length of the lens you are using (when using DA, D FA, FA J, FA or F lenses). The conversion indicator appears and the format size indicator disappears when the exposure metering timer of the U is on (it returns to 35 mm format display when the exposure metering timer is turned off).

  • Page 158: Using In Wireless Mode

    Using High-Speed Flash Sync Mode With the AF360FGZ, you can discharge the flash to take a picture at a shutter speed faster than 1/180 second. High-speed flash sync can be used with the flash attached to the camera, or wireless. Attaching and Using the AF360FGZ on the Camera 1 Remove the hot shoe cover and attach the AF360FGZ.
  • Page 159 Using in Wireless Mode 1 Place the AF360FGZ at the desired location. 2 Set the AF360FGZ power switch to [WIRELESS]. 3 Set the AF360FGZ wireless mode to S (Slave). 4 Turn the camera mode dial and set the exposure mode to e, b, c or a mode.

  • Page 160: Red-Eye Reduction

    Red-Eye Reduction As with the built-in flash, red-eye reduction is available with an external flash. This may not be available on some flashes or may have restrictions for usage conditions. See the chart on p.154. • The red-eye reduction feature works even when only an external flash is used.
  • Page 161 Discharging Multiple Flashes You can combine two or more AF360FGZ external flashes or you can use two or more AF360FGZ external flashes in combination with the built-in flash. Connect them as shown in the figure below: Attach an off-camera shoe adapter F (optional) to the external flash and the hot shoe adapter F (optional) and connect the extension cord F5P (optional) to the off-camera shoe adapter F on the other external flash.
  • Page 162 Hot Shoe Grip as a malfunction may occur. • Combining with flashes from other manufacturers may cause equipment breakdown. We recommend using the PENTAX dedicated automatic flashes. 1 Connect the external flash to the camera indirectly. (p.158) 2 Set the sync mode for AF360FGZ to the Contrast-Control-Synch mode.

  • Page 163: Settings During Playback

    Settings During Playback Changing Playback Display Method Set information to show during playback. The camera switches display information when you press M button. Images only Only captured images are displayed. Image+Histgrm Images and histogram are displayed. Image+Detailed Info Image details appear with a small image in the upper left. Last memory Display settings are retained from previous session.

  • Page 164: Setting The Slideshow Display Interval

    Set in [Bright Portion] in the [Q Playback] menu. (p.98) Bright Portion Instant Review Instnt review+Plybck Cancel Setting the Slideshow Display Interval You can play back all images recorded on your SD Memory Card successively. (p.68) Set image display interval to [3 sec], [5 sec], [10 sec] or [30 sec]. The default setting is [3 sec].

  • Page 165: Camera Settings

    Camera Settings Formatting the SD Memory Card Be sure to format new SD Memory Card with the camera before using the card. Formatting will delete all the data on the SD Memory Card. • Do not open the card cover while formatting SD Memory Card. The card may be damaged beyond use.

  • Page 166: Turning The Beep On And Off

    Turning the Beep On and Off You can turn the camera operation beep on or off. The default setting is [On]. Set in [Beep] in the [H Set-up] menu. (p.99) Set-up Format Beep Date Adjust World Time Guide display Exit Changing the Date and Time and the Display Style You can change the initial date and time settings.

  • Page 167: Setting The World Time

    Setting the World Time The date and time selected in “Initial Settings” (p.33) serve as the date and time of your present location. Setting [World Time] enables you to display the local date and time on the LCD monitor when traveling overseas. Select [World Time] on the [H Set-up] menu.
  • Page 168 Use the four-way controller (45) to select the Destination city. The current time, location and time difference of the selected city appears. Use the four-way controller (3) to select [DST]. Use the four-way controller (45) to select O (On) or P (Off).

  • Page 169: List Of World Time Cities

    List of World Time Cities City Region Honolulu North America Anchorage Vancouver San Francisco Los Angeles Calgary Denver Chicago Miami Toronto New York Halifax Mexico City Central and South Lima America Santiago Caracas Buenos Aires Sao Paulo Rio de Janeiro Madrid Europe London...

  • Page 170: Setting The Display Language

    Setting the Display Language You can change the language in which the menus, error messages, etc. are displayed. Set in [Language/ You can choose from eleven languages: English, French, German, Spanish, Italian, Swedish, Dutch, Russian, Korean, Chinese (Traditional/ Simplified) and Japanese. 1 Setting the Display Language (p.33) English Nederlands...

  • Page 171: Adjusting The Brightness Of The Lcd Monitor

    Adjusting the Brightness of the LCD Monitor You can adjust the brightness of the LCD monitor. Adjust settings when the LCD monitor is hard to see. Set in [Brightness Level] in the [H Set-up] menu. (p.99) Set-up Brightness Level Video Out Transfer Mode Auto Power Off 1 min...

  • Page 172: Setting Auto Power Off

    Setting Auto Power Off You can set the camera to turn off automatically if unused after a certain length of time. Select from [1 min], [3 min], [5 min], [10 min], [30 min] or [Off]. The default setting is [1 min]. Set in [Auto Power Off] in the [H Set-up] menu.

  • Page 173: Setting The Instant Review

    Setting the Instant Review Setting the Display Time Select from [1 sec], [3 sec], [5 sec] or [Off]. The default setting is [1 sec]. Set in [Instant Review] in the [A Rec. Mode] menu. (p.98) Rec. Mode Instant Review 1 sec Auto Bracket 3 sec AE Metering...

  • Page 174: Resetting To Default Settings

    Resetting to Default Settings Resetting Rec. Mode/Playback/Set-up Menu Settings in [A Rec. Mode] menu, [Q Playback] menu and [H Set-up] menu are reset to default settings. However, Date Adjust, Language, Video Out and World Time are not reset. Select [Reset] on the [H Set-up] menu. Press the four-way controller (5) to display the [Reset] screen.

  • Page 175: Resetting The Custom Function Menu

    Resetting the Custom Function Menu Reset settings in [A Custom Setting] menu to default settings. Settings in [A Rec. Mode] menu, [Q Playback] menu and [H Set-up] menu are not reset. Select [Reset] on the [A Custom Setting] menu. Press the four-way controller (5) and display the Reset Custom Fnction screen.
  • Page 176 Memo...

  • Page 177: Appendix

    Appendix Default Settings ...176 Functions Available with Various Lens Combinations ...180 Notes on [Using Aperture Ring] ...182 Cleaning the CCD ...183 Optional Accessories ...185 Error Messages ...188 Troubleshooting ...190 Main Specifications ...192 Glossary ...196 Index ...200 WARRANTY POLICY ...204...

  • Page 178: Default Settings

    Default Settings The table below lists the factory default settings. Table notations are as follows. Last Memory Setting Yes : The current setting (last memory) is saved when the camera is turned off. No : The setting returns to the default setting when the camera is turned off. Reset Setting Yes : The setting returns to the default setting with the reset function (p.172).
  • Page 179 [H Set-up] Menu Item Format Beep Date Adjust World Time setting Hometown (City) World Hometown Time (DST) Destination (City) Destination (DST) Language/ Guide display Brightness Level Video Out Transfer Mode Auto Power Off File # Sensor Cleaning Reset Last Default Setting Memory Setting —...
  • Page 180 [A Custom Setting] Menu Item Setting Noise Reduction Expsr Setting Steps ISO Corction in AUTO ISO Snstvty Wrn Dspl Link AF Point and AE Meter Operating Time AE-L with AF locked Recordable Image No. OK btn when shooting AE-L bttn on M expsr Superimpose AF Area AF in remote control FI with S lens used...
  • Page 181 Fn Menu Item Drive Mode Flash Mode White Balance ISO Sensitivity DPOF Settings Digital Filter Slideshow *1 Only continuous shooting settings are saved. *2 Only slimness and softness settings for the slim filter and soft filter are saved. Last Default Setting Memory Setting 9 (Single frame...

  • Page 182: Functions Available With Various Lens Combinations

    Functions Available with Various Lens Combinations Lenses that can be used with this camera Only DA and FA J lenses and D FA/FA/F/A lenses having an s position on the aperture ring can be used with this camera. Refer to “Notes on [Using Aperture Ring]”...
  • Page 183 Lens names and mount names FA prime lenses (non-zoom lenses) and DA, D FA, FA J and F lenses use the K mount. Of the FA zoom lenses, power zoom enabled lenses use the K 2 mount. Lenses without power zoom use the K lens manual for details.

  • Page 184: Notes On [Using Aperture Ring]

    Notes on [Using Aperture Ring] Aperture Ring Use When [Using aperture ring] is set to [2 Permitted] in [A Custom Setting] menu (p.101), the shutter can be released even if the aperture ring of the D FA, FA, F or A lens is not set to the s position or a lens without a s position is attached.

  • Page 185: Cleaning The Ccd

    Shadows may appear in the image for white backgrounds and other shooting conditions if the CCD becomes dirty or dusty. This indicates that the CCD must be cleaned. Please contact PENTAX service center for professional cleaning because the CCD is a precision part.
  • Page 186 Use the four-way controller (2) to select [Mirror Up]. Press the 4 button. The mirror is locked in the up position. Clean the CCD. Use a brush-less blower to remove dirt and dust from the CCD. Using a blower with a brush may scratch the CCD. Do not wipe the CCD with a cloth.

  • Page 187: Optional Accessories

    Optional Accessories A number of dedicated accessories are available for this camera. Please contact a service center for details regarding accessories. AC Adapter D-AC10 This AC adapter supplies power from the outlet into your camera. Cable Switch CS-205 This is a remote shutter release cord. The cord length is 0.5 m. Remote Control F Shoot pictures from within 5 m of the front of the camera.

  • Page 188: For Viewfinder

    Off-camera Shoe Clip CL-10 This is a setting clip for using the AF360FGZ as a wireless slave flash. Hot Shoe Adapter F Extension Cord F5P Off-camera Shoe Adapter F Use the adapters and cords to use the external flash away from the camera.
  • Page 189 Camera Case Camera Case O-CC34 Others The accessories below are the same as the accessories that are packaged with the camera. ME viewfinder cap Eyecup F Strap O-ST10...

  • Page 190: Error Messages

    Error Messages Error Message Memory card full No image Camera cannot display this image No card in camera Memory card error Card not formatted Card locked Card is locked Rotation information cannot be saved This image is protected Rotation information cannot be saved Cannot use this card Battery depleted...
  • Page 191 Error Message Image folder could not be created The image is not stored Settings not stored RAW images cannot be set RAW images are not supported No image to be filtered This image cannot be filtered No DPOF files Printer error No paper in a printer No ink in a printer Paper stuck in a printer...

  • Page 192: Troubleshooting

    Troubleshooting We recommend checking the following items before contacting a service center. Problem Batteries are not installed Camera does Batteries are not not turn on installed properly Battery power is The lens aperture ring setting is other than the s position The shutter Flash is charging does not...
  • Page 193 After the procedure is done, if the camera operates correctly, it does not require any repairs. Refer to p.13 of the “PENTAX PHOTO Browser 2.1/PENTAX PHOTO Laboratory 2.1 Operating Manual” for details on connecting the camera to a PC.

  • Page 194: Main Specifications

    Main Specifications Type Effective Pixels Sensor Recorded Pixels Sensitivity File Format Quality Level Storage Medium Number of Shots Quality Size Level 3008×2008 3008×2000 2400×1600 1536×1024 Compression: C (Best) = 1/3, D (Better) = 1/6, E (Good) = 1/12 White Balance LCD Monitor Playback Function Digital Filter...
  • Page 195 (1) Auto 1/4000 to 30 sec. (stepless), (2) Manual 1/4000 to Shutter 30 sec. [1/2 EV step or 1/3 EV step] (3) Bulb, Electromagnetic release, Shutter lock by setting Main switch in OFF position. Pentax K Lens Mount information contacts) Pentax K...
  • Page 196 Flash synchronization speed range at 1/180 sec. and slower, Daylight-sync flash, Slow-speed-sync flash, ISO range = P-TTL: 200 to 3200 Hot shoe with X-contact, which couples with Pentax dedicated auto flashes, ISO range = P-TTL: 200 to 3200, Automatic flash, Red-eye reduction flash function, High-speed-sync, wireless-...

  • Page 197: Specifications For Remote Control F (Optional)

    Specifications for Remote Control F (Optional) Infrared Remote Control unit, captured about three seconds after remote control shutter button is pressed or immediate Remote Control capture on pressing the button, operating distance = within approx. 5 m in front of the camera. Power One lithium battery (CR1620) Dimensions...

  • Page 198: Glossary

    Glossary AdobeRGB Color space recommended by Adobe Systems, Inc. for commercial printing. Wider range of color reproduction than sRGB. Covers most of the color range so colors only available when printed are not lost when editing images from a computer. When image is opened by non-compatible software, the colors look lighter.
  • Page 199 The color of light shifts to a bluish color as the color temperature rises, and to a reddish color as the color temperature falls. DCF (Design Rule for Camera File System) A digital camera file system standard established by the Japan Electronics and Information Technology Industries Association (JEITA). Depth of Field Area of focus.
  • Page 200 Histogram A graph that shows the darkest and brightest points in an image. The horizontal axis represents the brightness and the vertical axis represents the number of pixels. This is useful when you wish to refer to the exposure status of an image. JPEG An image compression method.
  • Page 201 Recorded Pixels Indicates the size of the image by the number of pixels. The more pixels that compose a picture, the larger the image size. Sensitivity The degree of light. With a high sensitivity, images can be shot with a high shutter speed even in dark places, reducing camera shake.

  • Page 202: Index

    Index Symbols [A Rec. Mode] Menu ...98, 176 [Q Playback] Menu ...98, 176 [H Set-up] Menu ...99, 177 [A Custom Setting] Menu ...100, 178 I Auto Picture ...43, 47 U Normal ...47 = Portrait ...47 s Landscape ...47 q Macro ...47 \ Moving Object ...47 .
  • Page 203 Custom Function ...100 [A Custom Setting] Menu ...100, 178 Date Adjust ...35 Date change ...164 Daylight (White Balance) ...112 Daylight-Sync Shooting ...52 Default Setting ...33, 176 Delete ...73 Delete All Images ...74 i (Delete) button ...94 Deleting a Single Image ...73 Depth of Field ...129 Digital Filter ...71 Diopter Adjust ...39...
  • Page 204 LCD panel ...22 Lens ...37, 180 Lens unlock button ...38, 92 Lithium batteries ...26 Macro q ...47 Main switch ...92, 94 \ (Manual focus) ...126 Manual focus \ ...126 Manual White Balance ...113 Matte Field ...127 3 button ...93, 94 Menu Operation ...96 Meter Operating Time ...133 Mirror Lock Up ...62, 184...
  • Page 205 Self-Timer ...55 Sensitivity ...115 Sepia (Digital Filter) ...71 [H Set-up] Menu ...99, 177 Shade (White Balance) ...112 Sharpness ...111 Shutter Priority Mode b ...135 Shutter release button ...45, 92, 94 Shutter speed ...128 Single mode l ...121 Slideshow ...68, 162 Slim (Digital Filter) ...71 Soft (Digital Filter) ...71 Spot Metering ...132...

  • Page 206: Warranty Policy

    Shipping charges are to be borne by the owner. If your PENTAX was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer’s representatives in that...
  • Page 207 Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact the PENTAX distributor in your country for more information and to receive a copy of the warranty policy.
  • Page 208 For customers in USA STATEMENT OF FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 209: Declaration Of Conformity

    Product Name: Model Number: U Contact person: Customer Service Manager Date and Place: September, 2005, Colorado PENTAX Imaging Company A Division of PENTAX of America, Inc. 600 12 Street, Suite 300 Golden, Colorado 80401 U.S.A. Phone: 303-799-8000 FAX: 303-790-1131 PENTAX Digital Still Camera...
  • Page 210 Information on disposal for users 1. In the European Union If your product is marked with this symbol, it means that used electrical/electronic products should not be mixed with general household waste. There exists a separate collection system for these products. Used electric/electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products.
  • Page 211 Memo...
  • Page 212 PENTAX U.K. Limited PENTAX France S.A.S. PENTAX Benelux B.V. PENTAX (Schweiz) AG PENTAX Scandinavia AB P.O. Box 650, 75127 Uppsala, SWEDEN PENTAX Imaging Company A Division of PENTAX of America, Inc. PENTAX Canada Inc. • Specifications and external dimensions are subject to change without notice.

This manual is also suitable for:

*istds2

Table of Contents