Daikin Altherma 3 R F Installer's Reference Manual page 300

Field settings table
Breadcrumb Field code Setting name
9.I [9-08] What is the maximum desired LWT for add. zone in cooling?
9.I [9-09] What is the allowed undershoot in cooling?
9.I [9-0A] What is the room buffering temperature in heating?
9.I [9-0B] What is the room buffering temperature in Cooling?
9.I [9-0C] Room temperature hysteresis.
9.I [9-0D] Pump speed limitation
9.I [9-0E] --
9.I [C-00] Domestic heating water priority.
9.I [C-01] --
9.I [C-02] Is an external backup heat source connected?
9.I [C-03] Bivalent activation temperature.
9.I [C-04] Bivalent hysteresis temperature.
9.I [C-05] What is the thermo request contact type for the main zone?
9.I [C-06] What is the thermo request contact type for the add. zone?
9.I [C-07] What is the unit control method in space operation?
9.I [C-08] Which type of external sensor is installed?
9.I [C-09] What is the required alarm output contact type?
9.I [C-0A] --
9.I [C-0B] --
9.I [C-0C] --
9.I [C-0D] --
9.I [C-0E] --
9.I [D-00] Which heaters are permitted if prefer. kWh rate PS is cut?
9.I [D-01] Contact type of preferential kWh rate PS installation?
9.I [D-02] Which type of DHW pump is installed?
9.I [D-03] Leaving water temperature compensation around 0°C.
9.I [D-04] Is a demand PCB connected?
9.I [D-05] Is the pump allowed to run if prefer. kWh rate PS is cut?
9.I [D-07] Is a solar kit connected?
9.I [D-08] Is an external kWh meter used for power measurement?
9.I [D-09] Is an external kWh meter used for power measurement, kWh meter used for smart
grid or a gas meter for hybrid unit?
9.I [D-0A] --
9.I [D-0B] --
9.I [D-0C] --
9.I [D-0D] --
9.I [D-0E] --
9.I [E-00] Which type of unit is installed?
9.I [E-01] Which type of compressor is installed?
9.I [E-02] What is the indoor unit software type?
9.I [E-03] What is the number of backup heater steps?
(*1) *6V_(*2) *9W_(*3) EBB*_(*4) EBV*_
(*5) *X*_(*6) *H*_(*7) *11*_(*8) *16*_
(*9) *SU*_(*10) *18*_(*11) *23*
Range, step
Default value
R/W 18~22°C, step: 1°C
22°C
R/W 1~18°C, step: 1°C
18°C
R/W [3-07]～[3-06]°C, step: 0,5°C
23°C
R/W [3-09]～[3-08]°C, step: 0,5°C
23°C
R/W 1~6°C, step: 0,5°C
1 °C
R/W 0~8, step:1
0: No limitation
1~4: 90~60% pump speed
5~8: 90~60% pump speed during
sampling
6 80% pump speed during sampling
6
R/W 0: Solar priority
1: Heat pump priority
0
R/W 0: No
1: Bivalent through header
R/W -25~25°C, step: 1°C
0°C
R/W 2~10°C, step 1°C
3°C
R/W 0: MMI requests (incl. quick logic)
1: 1 contact
2: 2 contacts
R/W 0: MMI requests (incl. quick logic)
1: 1 contact
2: 2 contacts
R/W 0: LWT control
1: Ext RT control
2: RT control
R/W 0: No
1: Outdoor sensor
2: Room sensor
R/W
0: Normally open
1: Normally closed
0
0
0
0
0
R/W 0: None
1: BSH only
2: BUH only
3: All heaters
R/W 0: No
1: Active open
2: Active closed
3: Smart grid
R/W 0: No DHW pump
1: Instant hot water
2: Disinfection
3: Circulation
4: Circulation and disinfection
R/W 0: No
1: increase 2°C, span 4°C
2: increase 4°C, span 4°C
3: increase 2°C, span 8°C
4: increase 4°C, span 8°C
R/W 0: No
1: Pwr consmp ctrl
R/W 0: Forced off
1: As normal
R/W (*3) 0: No (*4)
R/O (*4)
1: Solar for DHW (*3)
R/W 0: No
1: 0,1 pulse/kWh
2: 1 pulse/kWh
3: 10 pulse/kWh
4: 100 pulse/kWh
5: 1000 pulse/kWh
R/W 0: No
1: 0,1 pulse/kWh
2: 1 pulse/kWh
3: 10 pulse/kWh
4: 100 pulse/kWh
5: 1000 pulse/kWh
6: 100 pulse/kWh (PV meter)
7: 1000 pulse/kWh (PV meter)
8: 1 pulse/m³ (gas meter)
9: 10 pulses/m³ (gas meter)
10: 100 pulses/m³ (gas meter)
R/W (*4) 0 (*4)
R/O (*3)
2 (*3)
2
0
0
0
R/O 0~5
0: LT split
R/O
1
R/O 0: Reversible (*5)
1: Heating only (*6)
R/O 3: 6V (*1)
4: 9W (*2)
11/13
Installer setting at variance with
default value
Date Value
4P655201-1 - 2021.09