Daikin Altherma 3 R F Installer's Reference Manual page 120

9 | Electrical installation
Installer reference guide
120
Item
Changeover to external
heat source control
Power consumption digital
inputs
Safety thermostat
Smart Grid
Room thermostat (wired or
wireless)
Heat pump convector
Description
See "9.3.8 To connect the changeover to external
4
heat source" [ 132].
See "9.3.9 To connect the power consumption
4
digital inputs" [ 133].
See "9.3.10 To connect the safety thermostat
(normally closed contact)" [
See "9.3.11 To connect a Smart
See below table.
Wires: 0.75 mm²
Maximum running current: 100 mA
For the main zone:
▪ [2.9] Control
▪ [2.A] Thermostat type
For the additional zone:
▪ [3.A] Thermostat type
▪ [3.9] (read-only) Control
There are different controllers and setups
possible for the heat pump convectors.
Depending on the setup, you also need to
implement a relay (field supply, see
addendum book for optional equipment).
For more information, see:
▪ Installation manual of the heat pump
convectors
▪ Installation manual of the heat pump
convector options
▪ Addendum book for optional equipment
Wires: 0.75 mm²
Maximum running current: 100 mA
For the main zone:
▪ [2.9] Control
▪ [2.A] Thermostat type
For the additional zone:
▪ [3.A] Thermostat type
▪ [3.9] (read-only) Control
4
134].
4
Grid" [ 135].
ERLA11~16DAV3+W1 + EBVH/X11+16S18+23DJ
Daikin Altherma 3 R F
4P643602-1 – 2021.09