Insignia KY008 Installation Manual
  1. Manuals
  2. Brands
  3. Insignia Manuals
  4. Plumbing Product
  5. KY008
  6. Installation manual
Insignia KY008 Installation Manual

Insignia KY008 Installation Manual

Infrared sauna
Hide thumbs

Advertisement

Table of Contents

www.insigniashowers.com
Last Modified:19/03/2025
INSTALLATION MANUAL
KY008 Infrared
Sauna Series
30 Day Technical Support:
Call 01908 317512 and request technical support for aiding your
installation.
Replacements Parts:
Inside of your warranty period visit:
https://www.insigniashowers.com, click support and make a
warranty claim.
Spares/Replacements Parts:
Outside of your warranty period visit
https://www.insigniashowers.com/replacement-parts.html
ATTENTION INSTALLERS:
These instructions must be
left with the customer
CHECK ALL CONTENTS BEFORE BUILD COMMENCES. NO RETURNS CAN BE MADE
ONCE THE BUILD HAS STARTED AS IT IS DEEMED ACCEPTANCE OF PRODUCT!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KY008 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Insignia KY008

Summary of Contents for Insignia KY008

  • Page 1 Last Modified:19/03/2025 INSTALLATION MANUAL KY008 Infrared Sauna Series 30 Day Technical Support: Call 01908 317512 and request technical support for aiding your installation. Replacements Parts: Inside of your warranty period visit: https://www.insigniashowers.com, click support and make a warranty claim.
  • Page 2 www.insigniashowers.com Last Modified:19/03/2025 Contents Thank you for your purchase Front Panels Install Electrical & Tool requirements Roof Install Door Cushioning Strip Install Box contents Roof Cover Install Screw Pack Contents Door Handles Install Sauna Left Panel and Back Panel Install Door Magnet Brackets Install Bench Heater Install Securing the Electrics...
  • Page 3 Last Modified:19/03/2025 Thank you for your recent purchase of an Insignia Sauna. Please read this booklet with great care to ensure you get the best out of your build and have a Sauna that will last for many years to come! Like everything, in order to obtain a first class product that will serve you well for many years, the effort and correctness put into the assembly will reflect in the quality of your finish.
  • Page 4 Last Modified:19/03/2025 Electrical Requirements Model KY008 Tools Required Voltage Rating 220-240AC • Scissors Frequency Rating 50Hz • Knife Power Rating 1900 Watts Sauna • Spirit Level Total Amperage 8.0 amps • Tape Measure • Philips Screwdriver • Electric Drill Indoor saunas with power consumption under 3KW have been designed for easy installation, •...

  • Page 5: What's In The Boxes

    Bench Top Seat Door Handle Floor Insert VERY IMPORTANT Have you got everything? If not please contact the Insignia directly on 01908 317 512. Remember NEVER book your tradesman until everything has arrived, been checked and is present. No replacement/missing parts can be obtained free of charge during or after the build.

  • Page 6: Screw Pack Contents

    Nuts and Washers Rubber mats Cable splinter VERY IMPORTANT Have you got everything? If not please contact the Insignia directly on 01908 317 512. Remember NEVER book your tradesman until everything has arrived, been checked and is present. No replacement/missing parts can be obtained free of charge during or after the build.
  • Page 7 www.insigniashowers.com Last Modified:19/03/2025 Step 1 — Installing the Back and Left Panels Place the left and back panel in line and hook the clip onto the knob and secure by pushing down the lever.
  • Page 8 www.insigniashowers.com Last Modified:19/03/2025 Step 2 — Installing the Floor Place the floor of the sauna in line with the fitted back and left panel.
  • Page 9 www.insigniashowers.com Last Modified:19/03/2025 Step 3 — Installing the Bench Heater 4 x ST4 18mm Screws 4 x Rubber Pads Using the ST4 18mm screws and the Rubber pads found in the screw pack, connect the bench heater behind the bench frame as shown in the diagram. Ensure the rubber pads are positioned between the wood and the metal legs of the infrared heater.
  • Page 10 www.insigniashowers.com Last Modified:19/03/2025 Step 4 — Installing the Bench Front Panel Slot the bench front panel between the grooves and fit into place.
  • Page 11 www.insigniashowers.com Last Modified:19/03/2025 Step 5 — Connecting the Heater Wires Once the bench panel is in place, locate the splinter cable in the screw bag & connect the heater wires as shown in the dia- gram. If supplied, secure the earth wire on the back of the heater under the bolt.
  • Page 12 www.insigniashowers.com Last Modified:19/03/2025 Step 6 — Installing the Bench Seat Slide the bench top between the grooves and push till se- cure against the back and left panels.
  • Page 13 www.insigniashowers.com Last Modified:19/03/2025 Step 7 — Installing the Right Panel Repeat step 1 with the right panel.

  • Page 14: Step 8 - Installing The Door Panel

    www.insigniashowers.com Last Modified:19/03/2025 Step 8 — Installing the Door Panel Place the door panel in line with the latches and secure with locking the latches.

  • Page 15: Step 9 - Installing The Door Handles

    www.insigniashowers.com Last Modified:19/03/2025 Step 9 — Installing the Door Handles 2 x M45mm 2 x Nuts and Washers Connect the front piece and the first part of the back piece for the inside of the door, and tighten using the nuts. Connect the second part of the back piece and secure using the M 45 screws.
  • Page 16 www.insigniashowers.com Last Modified:19/03/2025 Step 10 — Installing the Roof Carefully place the roof into the remaining space making sure it is resting on all sides of the fitted ledges.
  • Page 17 www.insigniashowers.com Last Modified:19/03/2025 Step 11 — Connecting the Electrics Connect the wires of the main power, control box, temperature control and ozone.
  • Page 18 www.insigniashowers.com Last Modified:19/03/2025 Step 12 — Securing the Roof 8 x ST 50mm Secure the roof by screwing in the ST 50mm screws.
  • Page 19 www.insigniashowers.com Last Modified:19/03/2025 Step 13 — Installing the Wire Fixers 5 x ST 12mm Use the rubber bands to secure the wires to the roof using the ST 12mm screws.

  • Page 20: Step 14 - Electrical Connections

    www.insigniashowers.com Last Modified:19/03/2025 Step 14 — Electrical Connections 1. Main Power Supply 2. Group A : Connections for back and leg heater 3. Group B : Connections for front and side heater 4. Temperature Detector Wire 5. USB Input 6. Temperature Controller Wire 7.
  • Page 21 www.insigniashowers.com Last Modified:19/03/2025 Sauna Control Panel Instructions Button 1/2 (+/- Temp) Cycle through desired temperature setting (max 60°C) Button 3/4 (+/- Time) Cycle through desired time setting (max 99 mins) Button 5/6 (Sauna Heaters) Press to activate Sauna heaters. Pressing once will put the heaters on at 100%. Twice = 90%. Three times = 80%. Four times = 70% and five times = Off.

  • Page 22: Remote Control Instructions

    www.insigniashowers.com Last Modified:19/03/2025 Remote Control Instructions...
  • Page 23 www.insigniashowers.com Last Modified:19/03/2025 Sauna Usage & Safety Guide Never leave children unattended in the Sauna. Regulate (if preferred) the temperature of sauna before session - Pre-heat time 15-30 minutes (from room temperature 20c) Never touch the heater panels whilst in operation, possible burning may occur. Recommended time of use is a maximum of 15 mins initially.
  • Page 24 (EEE) have to fulfil certain obligations. Under the WEEE directive Insignia is considered the producer of certain products we supply and in line with the demands of the legislation we are pleased to offer the op- portunity to return these products to us for treatment and recycling.
  • Page 25 www.insigniashowers.com Last Modified:19/03/2025...

Table of Contents