Introduction; Gases Monitored - Honeywell BW MaxXT II User Manual

CHAPTER
2
To ensure personal safety, read See "Safety Information - Read First" on the next page for more
information. and See "Cautions" on the next page for more information. before using the
detector.
The BW MaxXT II gas detector ("the detector") warns of hazardous gas at levels above user-
defined alarm setpoints.
The detector is a personal safety device. It is your responsibility to respond properly to the
alarm.

Gases Monitored

The following table lists the gases that are monitored by the detector.
Gas Detected
Hydrogen sulfide (H
Carbon monoxide
Combustible gases (LEL)
Oxygen (O )
2
CAUTION: FOR SAFETY REASONS, THIS EQUIPMENT MUST BE OPERATED AND SERVICED
BY QUALIFIED PERSONNEL ONLY. READ AND UNDERSTAND THIS TECHNICAL REFERENCE
GUIDE COMPLETELY BEFORE OPERATING AND SERVICING.
BW MaxXT II

Introduction

S) parts per million (ppm)
2
parts per million (ppm)
a) percent of lower explosive limit (%LEL)
b) percent by volume methane 0-5.0% v/v
% volume
WARNING
Unit of Measure
6 User Manual