Table of Contents
Advertisement
Image Shape
If you see this screen, you cannot adjust the shape any further in
the direction indicated by the gray triangle.
a
h
Repeat steps 6 and 7 as needed to adjust any remaining corners.
i
When you are finished, press [Esc].
The Geometry Correction setting is now set to Quick Corner in the
projector's Installation menu.
The next time you press the arrow buttons on the control panel, the area
selection screen is displayed.
Correcting Image Shape with Point Correction
You can use the projector's Point Correction setting to fine-tune the image
shape in portions of an image. The image is divided into a grid which allows
you to move intersection points on the grid as necessary to correct distortion
(EH‑LS12000B).
a
Turn on the projector and display an image.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Installation menu and press [Enter].
d
Select Geometry Correction and press [Enter].
40
Advertisement
Table of Contents
