Table of Contents
Advertisement
Turning On the Projector
Turn on the computer or video equipment you want to use after you turn on
the projector.
a
Connect the power cord to the projector's power inlet and plug it into
an electrical outlet.
The projector enters standby mode. This indicates that the projector is
receiving power, but is not yet turned on.
b
Press the power button on the projector or the [On] button on the
remote control to turn on the projector.
The lens shutter opens and the status indicator flashes blue as the
projector warms up. Once the projector is warmed up, the status
indicator stops flashing and turns blue.
• When you turn on the projector for the first time, the initial
setup wizard is displayed. Make the focus, projection direction,
and language settings using the arrow and [Enter] buttons on
a
the control panel or remote control.
• The projector's menu screens are displayed in black by default.
All of the instructions in this guide are explained using white
screens unless otherwise mentioned. You can change the color
theme using Menu Color in the projector's Display menu.
Try the following if you do not see a projected image.
• Turn on the connected computer or video device.
• Change the screen output from the computer when using a laptop
computer.
• Insert a DVD or other video media, and press play (if necessary).
• Press the [Source] button on the projector.
• Press the button for the desired video source on the remote control.
Warning
• Never look into the projector lens when the light source is on. This can damage
your eyes and is especially dangerous for children.
• When turning on the projector at a distance using the remote control, make sure
there is no one looking into the lens.
• During projection, do not block the light from the projector with a book or other
objects. If the light from the projector is blocked, the area on which the light
shines becomes hot which could cause it to melt, burn, or start a fire. Also, the
lens may get hot due to the reflected light which could cause the projector to
malfunction. Turn off the projector to stop projection.
When the Direct Power On setting is set to On in the projector's
Operation menu, the projector turns on as soon as you plug it in. Note
a
that the projector also turns on automatically in cases such as recovery
from a power outage.
g g Related Links
• "Projector Feature Settings - Operation Menu"
31
p.81
Advertisement
Table of Contents
