Installing The Safety Wire; When Using The Ceiling Mount Elpmb22 - Epson EH-LS12000B User Manual

Installing the Safety Wire

You can install the safety wire to prevent the projector from falling from the
ceiling.
Warning
Be sure to use the safety wire provided with the Epson ceiling mount. The safety
wire is available as an optional Safety Wire Set ELPWR01.
g g Related Links
• "When Using the Ceiling Mount ELPMB22"
• "When Using the Ceiling Mount ELPMB30"

When Using the Ceiling Mount ELPMB22

You can attach a safety wire to your projector for increased safety as shown.
Before you start, make sure you have firmly installed the ELPMB22 ceiling
mount on the projector and have the following items that are included in the
safety wire set:
• Safety wire × 1
• Carabiner × 2
• Wire clamp × 1
• Attaching screw (M4 × 10 mm) × 1
For details on installing the ELPMB22, see the Ceiling Mount
ELPMB22/ELPMB23 Instruction Manual.
a
p.18
p.19
a Attach a carabiner to the hole on the ceiling mount, and tighten the
carabiner lock.
b Attach the wire clamp to another carabiner, and then use the screw to
fix the wire clamp to the wire clamp fixing point on the projector.
18