Table of Contents
Advertisement
Projector Placement
Warning
• Do not cover the projector's air intake or air exhaust vents. If the vents are
covered, the internal temperature could rise and cause a fire.
• Do not use or store the projector in locations where it will be subject to dust or
dirt. Otherwise, the quality of the projected image may decline. If the lens or air
filter gets dusty, it may result in a malfunction or fire.
• Do not install the projector on an unstable surface or in a location beyond the
weight specifications of the projector. Otherwise, it could fall or topple causing
an accident and injury.
• When installing the projector in a high position, take measures to prevent falling
by using wires to ensure safety in an emergency, such as an earthquake, and to
prevent accidents. If it is not installed correctly, it could fall causing an accident
and injury.
• Do not install in locations where salt damage could occur, or in locations subject
to corrosive gas such as sulphuric gas from hot springs. Otherwise, corrosion
could cause the projector to fall. It could also cause the projector to malfunction.
Attention
• If you are using the projector at altitudes above 1,500 m, set the High Altitude
Mode setting to On in the projector's Installation menu to ensure the projector's
internal temperature is regulated properly.
• Try not to setup the projector in locations subject to high humidity and dust, or
in locations subject to smoke from fires or tobacco smoke.
g g Related Links
• "Notes on Transporting"
p.16
• "Projector Setup and Installation Options"
• "Projection Distance"
p.17
Notes on Transporting
There are many glass parts and precision components inside the projector. To
prevent damage due to impacts when transporting, handle the projector as
follows.
• Remove any equipment connected to the projector.
p.16
• Center the lens position using the [Lens] button. If you transport the
projector when the lens is not centered, the lens shift mechanism may be
damaged.
• Make sure the lens shutter is closed.
• When transporting the projector a long distance or as checked luggage, pack
it in a firm box with cushioning around it and mark the box "Fragile."
• When shipping the projector for repairs, place it in its original packing
materials, if possible, or use equivalent materials with cushioning around
the projector. Mark the box "Fragile."
Epson shall not be liable for any damages incurred during
transportation.
a
Projector Setup and Installation Options
You can set up or install your projector in the following ways:
Front/Rear
16
Advertisement
Table of Contents
