Projector Installation Settings - Installation Menu - Epson EH-LS12000B User Manual

Projector Installation Settings - Installation Menu

Settings on the Installation menu help you set up your projector in your
installation environment.
Setting Options
Test Pattern Display Position
Color Isolation: R
Color Isolation: G
Color Isolation: B
Exit
Projection Front
Rear
Front/Ceiling
Rear/Ceiling
Description
Displays a test pattern to assist in
focusing and zooming the image and
correcting image shape (select Exit or
press the [Pattern] button to cancel
pattern display).
Sets the way the projector faces the
screen so the image is oriented correctly.
Setting Options
Geometry H/V-Keystone
Correction
(EH‑LS12000B)
Quick Corner
Point Correction
H/V-Keystone V-Keystone
(EH‑LS11000W)
H-Keystone
Blanking Top
Bottom
Left
Right
High Altitude On
Mode
Off
Reset Installation —
Settings
g g Related Links
• "Projection Modes" p.34
• "Image Shape" p.37
• "Projector Setup and Installation Options"
Description
Manually corrects horizontal and vertical
sides.
• V-Keystone: lets you manually correct
vertical side.
• H-Keystone: lets you manually correct
horizontal side.
Corrects image shape and alignment
using an on-screen display.
Divides the projected image into a grid
and corrects the distortion by moving the
selected point of intersection from side to
side and up and down.
Manually corrects horizontal and vertical
sides.
• V-Keystone: lets you manually correct
vertical side.
• H-Keystone: lets you manually correct
horizontal side.
Hides an area of the projected image that
you select using the arrow buttons.
Regulates the projector's operating
temperature at altitudes above 1500 m.
Resets all adjustment values on the
Installation menu to their default
settings.
p.16
79