Sony ILCE-9 Service Manual page 60

ILCE-9
2-3-36. JACK BASE (REAR) BLOCK
3 Attach the jack base (rear) block in
the direction of the arrow.
1 jack base (rear) block
rear side
: guide line
2 Insert the jack base (rear) block
in the direction of the arrow.
terminal unit cable
bottom side
speaker cable
2-3-37. LCD PANEL BLOCK
1 LCD panel block 3 two screws
(P2 M1.7 2.5)
top side
3 two screws
(P2 M1.7 2.5)
2 Put the LC-1035 flexible board through the hole.
front side
LC drop cushion
Note: Be careful not to cover the screw hole.
– Front view – : guide line
5 LC-1035 flexible board
6 Paste the wide area
of the LC drop cushion.
4 Paste the narrow area
of the LC drop cushion.
2-55
SYS SET