Sony ILCE-9 Service Manual page 34

Note: Assemble in the order indicated by the numbers assigned to the parts in the fi gures such as 1.
2-3-2. MB N CONTACT UNIT
2-3-3. CONTACT BLOCK
3 two screws (M1.7
1 contact block
front side
hole B
6 MB shield sheet L lock
1 MB N contact unit
2 MB F prevention sheet
5 claw
bottom side
4)
hole A
contact block
Note 1: Do not touch the contact portion.
3 MB N holder A
front side
4 Insert the flexible board into
the hole of the MB N holder A.
Note 2: Take care not to damage
the flexible board.
Note 1: Do not touch the contact portion.
2 Insert the flexible board into hole A, and
B.
Note 2: Take care not to damage
the flexible board.
5 Paste the flexible board.
4 boss
rear side
2-29
ILCE-9
4 boss
top side
SYS SET