Sony ILCE-9 Service Manual page 43

2-3-16. SY MAIN FRAME BLOCK
4 four screws
(M1.7 4)
1 SY main frame block
3 Install the SY main frame block.
Note 2: Take care so that the flexible
board is not pinched.
rear side
bottom side
2-3-17. SY-1081 BOARD
– Front view –
2 SY radiation sheet (U H)
: guide line
5 FP protection sheet (C)
3 SY radiation sheet (REGI H)
1 SY-1081 board
– Rear view –
: guide line
2-38
: guide line
FP protection sheet (C)
– Rear view –
2 Insert the two flexible boards into the
hole of the SY main frame block.
Note 1: Take care not to damage
the flexible board.
: guide line
6 Paste the BT-2019 flexible board
5 SY radiation sheet (RE H)
0 to 0.5 mm
0 to 0.5 mm
0 to 0.5 mm
0 to 0.5 mm
4 SY radiation sheet (F)
ILCE-9
turn down
– Rear view –
SYS SET