Sony ILCE-9 Service Manual page 25

2-2-24. SY MAIN FRAME BLOCK
3 four screws
(M1.7 4)
6 SY main frame block
4 Lift up the SY main frame block.
rear side
bottom side
2-2-25. ANTI SHAKE UNIT
– Front view –
Hold here.
2 Peel off the AS graphite
sheet BTM
2 FP protection sheet (C)
1 tape AS (2040)
(9 14 mm)
Do not touch this part.
2 Peel off the AS graphite
sheet BTM
5 Draw the two flexible boards out of the hole.
Note: Take care not to damage
the flexible board.
1 Peel off the BT-2019 flexible board
bottom side
2-20
– Rear view –
3 AS graphite sheet top
4 three screws
(P2 new truster M2
5 anti shake unit
6 three IM adjust washers D
Note: Take note of the amount of
IM adjust washers D.
rear side
ILCE-9
5)
SYS SET