Sony ILCE-9 Service Manual page 46

2-3-21. MIS-2003 FLEXIBLE BOARD
bottom side
2 boss
rear side
1 shoe base B-assy
4 Insert the flexible board into the hole.
Note 1: Take care not to damage
the flexible board.
7 shoe cap
6 four screws (M1.7 4)
2 boss
3 MIS-2003 flexible board
rear side
5 Apply the adhesive bond (B-40)
to four screws (M1.7
Including
lower side.
Note 2: Confirm that the adhesive bond does not protrude.
If glue adheres bond to the flexible board, cabinet
inner or appearance, wipe it off.
top side
2-41
ILCE-9
Ver. 1.2
4).
B-40
B-40
coating area
SYS SET