Sony ILCE-9 Service Manual page 11

ILCE-9
2-2-5. LCD PANEL BLOCK
6 LCD panel block 4 two screws
(P2 M1.7 2.5)
top side
4 two screws
(P2 M1.7 2.5)
5 Draw the LC-1035 flexible board out of the hole.
front side
LC drop cushion
– Front view –
1 Peel off the wide area 2 LC-1035 flexible board
of the LC drop cushion.
3 Peel off the narrow area
of the LC drop cushion.
2-2-6. JACK BASE (REAR) BLOCK
1 Lean the jack base (rear) block
in the direction of the arrow.
3 jack base (rear) block
rear side
2 Remove the jack base (rear) block
in the direction of the arrow.
bottom side
2-6
SYS SET