Sony ILCE-9 Service Manual page 50

ILCE-9
Ver. 1.2
2-3-25. 2 STEP DIAL ASSY, TOP L JOINT PLATE ASSY
5 top L joint plate assy
6 three hooks
2 two tapping screws (1.7 4) (CH)
7 Arrange the flexible board.
4 AFMF lock spring
3 AM dial lock button
8 two hooks
rear side
9 Align the D-shaped knob
1 2 step dial assy
as shown in the figure.
qk tape AS (9 )
– Bottom view –
qh boss
qa Install the top L joint plate block
in the direction of the arrow.
qj two screws (0+Z M1.7 4 SG (SPIN))
qd three screws (M1.7 4)
qs two shafts
0 Align the D-shaped hole of 2 step
dial assy as shown in the figure.
qg eyelet (L) assy
qf screw (M1.7 2.5)
– Bottom view –
front side
2-45
SYS SET