Sony ILCE-9 Service Manual page 41

2-3-14. IM IMAGER BLOCK
Note 1: When install the spacer sheet to the imager and the
optical filter block, install them so that the each
centers are matched and top and bottom right and
left become uniform.
imager
spacer sheet
optical filter block
Note 2: When install the optical filter block to the imager,
confirm the mounting direction of the optical filter
block by shedding light from obliquely.
optical filter block
Reflected in red
IR coated surface
optical filter block
mount side
IR coated surface
: guide line
optical filter block
AR coated surface
imager side
AR coated surface
AS graphite sheet IMG
AS graphite sheet IMG
3 Insert two pins (Ø 1.22 ± 0.01) into holes.
front side
top side
6 three IM imager fix shafts (M1.7
5 hook
rear side
top side
ISL-2007 flexible board
2-36
ILCE-9
1 IM imager block
TEX-5300
2 Insert the two flexible boards
into the hole of the TEX-5300.
5)
4 IM glass retainer plate block
pin (Ø 1.22 ± 0.01)
9 two AS graphite sheets IMG
8 Install the ISL-2007 flexible
board to two bosses.
7 Install the ISP-2006 flexible
board to two bosses.
ISP-2006 flexible board
SYS SET