Initial Display Console Set Up; Console Factory Reset Steps; Key Function - Ambient Weather WS-1950 Manual

5. Outdoor temperature
6. Outdoor humidity
7. Indoor humidity
8. Indoor temperature

5.4.2 Initial Display Console Set Up

Insert the batteries to power up the display console.
The unit will show software version number 2 seconds after power reset.
The unit will turn on all segments of the LCD for 3 seconds after power reset, the display will attempt to register the
outdoor sensor array for 3 minutes.

5.4.3 Console Factory Reset Steps

Under AC power (using optional AC adapter): press and hold Light + Mode (Figure 15) for 5 seconds
Under battery power (no AC adapter connected): press and hold Light button (Figure 15) for 2 seconds
until "WAK" is displayed then press and hold Light + Mode (Figure 15) for 5 seconds
Note: WAK mode will revert to normal after 3 seconds.

6 Key function

The console has five keys for easy operation
13. WIFI icon
14. Time
15. Daylight Savings Time (DST)
Figure 14
10