Further System Settings - VGE Pro UV Control Monitor+ 420 Manual

Manual for:
VGE Pro UV Control Monitor+ 400/420/600 and VGE Pro UV Control Monitor+ 140/200 EP600001, EP200002
7

Further system settings

All basic functionality like changing clock, date or display contrast is not described exactly,
please refer to "main menu overview" below.
Changing lamp operation parameter
Changing lamp parameters requires background information concerning UVC lamps and operating parameter. Please
ask lamp manufacturer or system distributor for lamp details.
An appropriate measuring technique is needed to determine the impact on the lamp if ballast settings are changed.
Note: use this feature to adjust the system to the actual operation conditions (e.g. environment temperature)
Installation and configuration of digital UV Sensor
(to be specified)
see 'Settings' - submenu overview 'main menu' à 'settings' à'UV sensor'
Installation and configuration of external temperature sensor
(to be specified)
see 'Settings' - submenu overview 'main menu' à 'settings' à'temperature'
Connecting external Interlock circuit
(to be specified)
Update system firmware
(to be specified)
Configuring the system for remote start operation
(to be specified)
www.vgebv.nl 13/18
02/2017