Table of Contents
Advertisement
Manual for:
VGE Pro UV Control Monitor+ 400/420/600 and VGE Pro UV Control Monitor+ 140/200
Observing operation status information
The system provides a number of operation status information. The system operation state is displayed on the
'main screen'. Further details and measurement values are display on a number of 'info screens'.
Press button UP to toggle between the 'main screen' and 'info screens'.
Main screen
system on / off
Remote / local operation
all lamps on/off / a warning or alarm is occurred
clock
info screen 1
UV value (if UV sensor is present)
info screen 2
Temperature of frontend board
Temperature of the ballasts on base board
External Temperature (if external temperature sensor is present)
Info screen 3
actual lamp current and lamp power of all lamps
Info screen 4
Lamp hour counter
Lamp switch on cycle counter
Remaining lamp lifetime
The number of info screens may vary depending on available information.
Examining warning / error messages
If a warning or error occurs a message will appear on the main screen. Further details about the warning or error will be
displayed on submenu 'show status'.
Press the button ENTER to access the 'main menu', navigate to 'show status' using the button UP and DOWN, confirm
with ENTER
02/2017
www.vgebv.nl
EP600001, EP200002
12/18
Advertisement
Table of Contents
