Assembly Inspection; Final Inspection; Vehicle Test Run; Vehicle Cleaning - BRP MAX Series Manual

tbl2013-009-048_b
HIGH SPEED COMPRESSION DAMPING (USE A 17 MM
WRENCH)
1. High speed adjuster
2. Increases damping (stiffer)
3. Decreases damping (softer)
Rebound Damping
X rs DPS Models
Use a flat screwdriver to adjust it.
tbl2013-009-049_a
1. Rebound adjuster
2. Increases rebound (stiffer)
3. Decreases rebound (softer)

ASSEMBLY INSPECTION

Inspect the following parts to make sure that the
vehicle is properly assembled.
1. Chassis
2. Steering operation
3. Suspension arm ball joint cotter pins
4. Tie rod end nuts and cotter pins
PREDELIVERY

FINAL INSPECTION

Vehicle Test Run

Ride the vehicle to ensure proper operation of all
systems and components.

Vehicle Cleaning

1. Wash and dry the vehicle.
NOTICE Never use a high pressure washer to
clean the vehicle. USE LOW PRESSURE ONLY
(like a garden hose). The high pressure can
cause electrical or mechanical damages.
2. Remove any dirt.
3. Clean vinyl and plastic parts, using a chamois,
a flannel cloth or a microfiber cloth with
MULTI-PURPOSE CLEANER (P/N 219 701 709)
NOTICE
It is necessary to use a chamois, a
flannel cloth or a microfiber cloth on plastic
parts to avoid damaging surfaces. Never clean
plastic parts with strong detergent, degreasing
agent, paint thinner, acetone, products con-
taining chlorine, etc.
4. Clean the entire vehicle, including metallic
parts, with
XPS ATV WASH (P/N 219 701 702)
5. Painted parts which are damaged should be
properly repainted to prevent rust.

Delivery To Customer

Before Delivery the Vehicle
PREDELIVERY CHECK LIST
Complete the
The customer must read and sign the
ERY CHECK LIST .
OPERATOR'S GUIDE
Give
customer.
Any person who rides this vehicle should read and
understand all the information given on hang tag
and safety labels before riding.
2014-1
FINAL INSPECTION
XPS
.
.
.
PREDELIV-
SAFETY DVD
and to
29 / 34