Suspension Factory Settings - BRP MAX Series Manual

ADJUSTMENTS
tbl2013-009-022_b
FRONT SUSPENSION — X RS MODELS
1. Preload adjustment
2. Low speed and high speed compression damping adjuster
3. Rebound adjuster
tbl2013-009-026_b
REAR SUSPENSION — BASE MODELS
1. Preload adjustment
2. Compression damping clicker
ADJUSTMENT
Spring preload
Compression damping
Compression damping
(low speed)
Compression damping
(high speed)
Rebound damping
26 / 34
FRONT SUSPENSION FACTORY SETTINGS
MODEL
Base
X rs DPS
Base
X rs DPS
X rs DPS
X rs DPS
2014-1
tbl2013-009-027_b
REAR SUSPENSION — X RS MODELS
1. Preload adjustment
2. Low speed and high speed compression damping adjuster
3. Rebound adjuster

Suspension Factory Settings

For adjustment procedures, refer to
PRELOAD ADJUSTMENT (FRONT AND REAR)
and SHOCK DAMPING ADJUSTMENTS (FRONT
AND REAR) in this section.
To adjust compression and rebound to factory set-
tings, proceed as follows:
1. Turn adjuster clockwise until it stops.
2. Turn adjuster counterclockwise by the specified
amount, see table below.
FACTORY SETTING
78.3 mm (3.08 in)
103 mm (4.05 in)
12 positions
9 positions
9 positions
12 positions
SPRING
PREDELIVERY