BRP MAX Series Manual page 10

PARTS TO BE INSTALLED
PDI KIT PARTS
M12 x 60 Flange hexagonal bolt
M12 flange elastic nuts
tbl2014-007-202_a
TYPICAL
1. M12 x 60 Flange hexagonal bolts
2. M12 flange elastic nuts
TIGHTENING TORQUE
Shock absorber nuts
4. Lower vehicle.
Rear Shock Absorber Installation
1. Remove the small covers on rear cargo rack.
tbl2013-009-121_a
2. Install a lifting strap to rear frame member
where shown.
NOTICE Do not use a chain. It might damage
the cargo rack.
10 / 34
QTY
2
2
54 N•m (40 lbf•ft)
2014-1
tbl2014-007-203_a
LIFTING STRAP — CARGO RACK REMOVED FOR CLARITY
PURPOSE ONLY
3. Safely lift rear of vehicle using a hoist.
4. Remove the suspension brackets. Discard
bolts and nuts.
tbl2013-009-025_a
TYPICAL RH SIDE SHOWN
5. Install shock absorbers. Place reservoir, re-
bound adjuster and bolt heads outwards.
PDI KIT PARTS
M12 x 60 Flange hexagonal bolts
M12 flange elastic nuts
QTY
2
2
PREDELIVERY