BRP MAX Series Manual page 20

FLUIDS
tbl2013-009-042_a
FULLY LIFT COVER
Remove radiator pressure cap.
tmo2011-001-313_a
1. Radiator pressure cap
Ensure cooling system is full up to the pressure
cap seat.
tmr2011-011-028_a
1. Cooling system refill adapter
2. Expansion tank hose
3. Coolant system full level (pressure cap seat)
20 / 34
Add coolant in system if necessary.
Reinstall radiator pressure cap.
Check coolant level in expansion tank by looking
at the side of the coolant expansion tank.
tbl2013-009-051_a
Coolant should be at the MIN mark when engine
is COLD.
tbl2013-009-043_a
COOLANT EXPANSION TANK
Add coolant if required.
Remove filler cap from expansion tank.
Add coolant up to MIN mark.
Use a funnel to avoid spillage. Do not overfill.
Reinstall filler cap.
Reinstall service cover.
2014-1 PREDELIVERY