BRP MAX Series Manual page 24

B.U.D.S. PROGRAMMING
vbl2008-007-001
RESET TRIP BUTTONS
It can also be done directly on the info-cen-
NOTE:
ter, using the selector button.
Resetting Last Service
1. Click on the RESET SERVICE button to reset
the informations.
vbl2006-007-004
RESET SERVICE BUTTON
After each maintenance service, last service
should be reset to keep a good tracking of the
vehicle service history.
Programing Keys
1. Click on KEYS tab.
smr2005-072-001_en
KEYS TAB
24 / 34
2. Click on ERASE ALL KEYS button.
tbl2011-001-052_a
1. Click here to erase all keys
3. Click "YES" to confirm the action.
4. Confirm key color in ignition switch.
5. Program the key by selecting the right type ac-
cording to chart.
KEY
BLACK key
GRAY key
tbl2011-001-053_d
1. Add Performance Key button
2. Add Normal Key button
6. Turn ignition switch to OFF. Remove the key.
7. Install the other key.
8. Turn ignition key to ON position.
9. Program the other key by selecting the right
type according to above chart.
10. Repeat steps 6 to 9 to program other keys (8
maximum).
The Work key (ORANGE key) is optional.
NOTE:
Language and Speedometer Reading
Gauge settings can be changed to accommodate
the owner preferences:
– Language (English, French, Spanish, Dutch,
etc.)
– Units (Miles or Kilometers)
– Country (NA)
– Time clock (12hr or 24hr)
1. Select SETTING tab in B.U.D.S.
2. Modify the selections in accordance with the
owner preferences.
2014-1
KEY TYPE
Performance key
Normal key
PREDELIVERY