BRP MAX Series Manual page 13

tbl2014-007-133
LIFTING CAGE TO POSITION IT ABOVE VEHICLE
9. Loosely install the rear and middle cage sub-
assembly to vehicle.
PDI KIT PARTS
M10 x 30 Torx screws
10. Install screws from the rear of vehicle, besides
top of shock absorbers.
tmr2014-117-006_a
RH REAR CAGE ATTACHMENT POINT
11. Remove plastic cap located just behind front
passenger seat and install screws and wash-
ers at the center of vehicle.
PREDELIVERY
tmr2014-117-005_a
1. Plasic cap
12. Reinstall rear lateral panels.
QTY
8
tbl2013-009-035_b
BESIDES SCREWS OF REAR CAGE ATTACHMENT POINT
13. Reinstall support plates to retain the top of the
rear lateral panels.
Position the "FRONT" marking on plates to-
NOTE:
ward front of vehicle.
tbl2013-009-037_a
"FRONT" MOLDED ON PLATE
2014-1
PARTS TO BE INSTALLED
13 / 34