Summary of Contents for Ballard Designs Amalfi JC003
Page 1
Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Amalfi 48 Inch Round Dining Table ITEM NUMBER: JC003 DIMENSIONS OF ITEM ASSEMBLED: 29 1/4”H x 48”Diam. UPDATED: 9/25/2013 PRODUCTS ARE NOT INTENDED MADE IN CHINA FOR COMMERCIAL USE. Page 1 of 4...
Page 2
Table Top (F) Parts Bag Located Here (A-E, I & J) Center Plates (G) Table Legs (H) Ltr. Qty. Hardware Included Headless Bolts TOOLS NEEDED: -Assembly requires 2 or more people. Washers -Wrench required. Lock Washers NOTE: The Table comes with an Umbrella Hole Cover (J) if you Nuts choose to use it.
Page 3
WARNING: Aluminum is a soft metal and over-tightening will strip the thread or break the part. STEP 1: Turn the Table Top (F) upside down on a smooth, clean surface. Loosely attach the Table Legs (H) to the Table Top (F) using the Headless Bolts (A), Washers (B), Lock Washers (C) and Nuts (D).
Page 4
WARNING: Aluminum is a soft metal and over-tightening will strip the thread or break the part. STEP 3: Turn the Table upright. If the Table is uneven, adjust the levelers on the bottom of each Leg (H) by twisting them clockwise or counterclockwise until the Table is even. Insert the Umbrella Ring (I) if the hole is too large for your umbrella pole.