Related Manuals for Ballard Designs Del Ray Ping Pong Table JM083
Summary of Contents for Ballard Designs Del Ray Ping Pong Table JM083
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Del Ray Ping Pong Table ITEM NUMBER: JM083 ASSEMBLED DIMENSIONS : 30”H x 48”W x 96”L PRODUCTS ARE NOT INTENDED MADE IN USA FOR COMMERCIAL USE. UPDATED: 3-2-2020 Page 1 of 8...
-
Page 2: Tools Needed
TOOLS NEEDED: Qty. Hardware Included Rubber Mallet. Two person assembly suggested. Remove all parts, hardware and protective packaging from carton and carefully arrange Allen Screw on a clean, level, padded surface. NOTE: To avoid accidentally discarding small parts Allen Wrench or hardware, retain all carton contents until assembly and installation are complete. - Page 3 IMPORTANT: 1. Unpack and lay all Ping Pong Table pieces flat on a padded surface to avoid scratching or damaging the components. 2. Look for an engraved letter near each slot on the enclosed pieces. Always match up coordinating slots (A+A, B+B, etc.) to ensure proper assembly. 3.
- Page 4 STEP 3: Locate the 2 shelves and place them on top of the bottom crossbars. Once in place, maneuver the shelves slightly until they are positioned correctly over the fasteners and use a slight tap on each corner to secure. STEP 4: Align the corresponding letters of the 2 brackets and insert them into the table legs using the letter system.
- Page 5 STEP 5: Insert 4 additional keys into the key slots located on the brackets as you did in step 1. Wait until step 10 to screw the keys into place. STEP 6: Align the corresponding letters of the top crossbars and insert them into the table legs using the letter system.
- Page 6 STEP 7: Insert 8 remaining keys into the key slots located on the brackets as you did in step 1. Wait until step 10 to screw the keys into place. STEP 8: Align the corresponding letters of the long crossbar and insert the piece into the table frame using the letter system.
- Page 7 STEP 9: Place the table top on top of the frame. Adjust slightly until the grooves on the bottom of the table align and the table rests properly on the table frame. STEP 10: Locate the 20 keys you have already inserted into the table and screw them into place using the included Allen screws and Allen wrench.
-
Page 8: Cleaning Instructions
STEP 11: Snap the net into place, using a mallet if necessary. CLEANING INSTRUCTIONS: ROUTINE CLEANING For routine cleaning, just use water and a soft cloth or microfiber towel, or spray down with a water hose. For a deeper clean, use mild soap and water and a soft bristle brush. POWER WASHING If power washing is desired, start with a low PSI, at least 3 ft away from furniture.
Need help?
Do you have a question about the Del Ray Ping Pong Table JM083 and is the answer not in the manual?
Questions and answers