Mitsubishi Electric 800 Series Assembly & Installation Manuallines page 28

BASIC OPERATION
5.1.2 Basic operation (factory setting)
Operation mode switchover/frequency setting
External operation mode (At power-ON)
First screen (Output frequency monitoring)
Parameter setting mode
*5
Function mode
Hold down
*1
For the details of operation modes, refer to the FR-A870 Instruction Manual (Function).
*2
Monitor items can be changed. (Refer to the FR-A870 Instruction Manual (Function).
*3
For the details of the trace function, refer to the FR-A870 Instruction Manual (Function).
*4
For the details of fault history, refer to the FR-A870 Instruction Manual (Function).
*5
The USB memory mode will appear if a USB memory device is connected. (Refer to the FR-A870 Instruction Manual (Function)).
22
*1
PU operation mode
Value change
(Output current monitoring)
*2
Value change
Parameter clear All parameter clear
Group parameter setting
(Example)
Flickering
Fault record 1
[Operation for displaying faults history]
The last eight fault records can be displayed.
(On the display of the last fault record (fault record 1), a decimal point LED is ON.)
When the fault history is empty,
*1
Second screen
*2
Fault history clear
Automatic parameter setting
*3
Trace function
(Example)
Flickering
*4
Fault record 2
is displayed.
*1
PU JOG operation mode
Alternate display
Example
Frequency setting has been written and
completed!
Third screen
(Output voltage monitoring)
Display the present
setting
Alternate display
Example
Parameter write is completed!
Parameter copy
Initial value change list
(Example)
Flickering
*4 *4
Fault record 8
*2