Rear Panel Features And Operation - Extron electronics CSVEQ 100 D User Manual

Operation, cont'd

Rear Panel Features and Operation

a
Power connector — Connect the external 12 VDC power supply
into this 2-pin, 3.5 mm direct insertion connector. The power
supply is included with the unit. The "Power supply wiring"
section in this chapter explains how to wire the connector.
b
Audio output connector — Wire a balanced/unbalanced audio
output device to this 3.5 mm, 5-pole, direct insertion captive
screw connector. See the following wiring diagrams.
CSVEQ 100 D • Operation
3-4
CSVEQ 100 D
AUDIO
OUTPUT
CONFIG
JUMPER POSITION
4
OFF = DUAL MONO
ON = STEREO
AUDIO OUTPUT
3
CSVEQ 100 D Rear Panel
2
5
6
7
8
9
1