Subscribe to Our Youtube Channel
Related Manuals for Mooreco 91782 Series
Summary of Contents for Mooreco 91782 Series
- Page 1 Avid Modular Desk System - Return Desk Part Number: 91782-XXXX-XX ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE ENSEMBLAJE INSTRUCTIONS DE MONTAGE DO NOT THROW AWAY! NO LA TIRE NE PAS JETER UPDATED AS OF: 12/01/2021 1 of 10...
- Page 2 Parts Hardware P1 - Large Top A - Leg Panel Screw (1/4-20 x 75mm) B - Leg Panel Screw P2 - Small Top (1/4-20 x 95mm) C - Ped. Panel Screw (M6 x 12mm) P3 - Leg Set D - Ped. Wood Screw (#12 x 1”) P4 - Modesty Panel E - Leg Wood Screw...
- Page 3 WARNINGS AND DISCLAIMERS ADVERTENCIAS Y RENUNCIAS AVERTISSEMENTS Review full assembly instructions and Previo a comenzar el proceso de Avant de commencer l’ assamblage check that all parts are present before ensamblaje favor revisar veuillez consulter instructions beginning assembly. Heavy or large instrucciones y asegurarse que cuenta con complètes et vérifier si vous avez toutes furniture may require multiple persons in...
- Page 4 STEP 1 Open shelves and remove handle screws. Swap handles to front of shelves and insert handle screws from inside of shelves to secure handles in place. STEP 2 Remove shelves by first extending shelf to furthest setting until catch engages. To slide shelf off of rails, rotate visible catch levers on both sides of shelf either up or down while gently pulling shelf.
- Page 5 STEP 3 Place tops on a flat protective surface with pre-drilled holes face-up. Arrange tops in positions shown for left or right handed desk installation. LEFT HANDED RIGHT HANDED STEP 4 Set pedestals (with shelves removed) upside down on tops. Secure to tops with wood screws inserted through holes in pedestal top brackets.
- Page 6 STEP 5 Screw in Leg Set to Large Top. Make sure Leg Set is oriented as shown before screwing. STEP 6 Install Modesty Panel using two screws through Leg Set and two screws within pedestal. Note that Leg Panel Screws will insert through inside holes on Modesty Panel.
- Page 7 STEP 7 Place Long Crossbar in between pedestal and Leg Set and secure with two screws at each end, making sure that two side holes are in location shown. Fit two U-clamps over crossbar and screw into top. STEP 8 Insert casters for Leg Set and pedestal.
- Page 8 STEP 9 Working with Small Top, add Pedestal Casters with screws. Attach Short Crossbar with two screws into pedestal. Set one U-Clamp over crossbar close to edge and screw into top with wood screws. STEP 10 With two people, flip large top assembly upright. Next set return on its casters and push top together with large top as shown.
- Page 9 STEP 11 Install second Modesty Panel by inserting screws through Leg Set and pedestal. Note that Leg Panel Screws will have to be inserted in outside holes as shown. STEP 12 From underneathe desk add one U-clamp to Short Crossbar and screw into Large Top. Add Ganger across top edges, close to Modesty Panel, and secure with wood screws.
- Page 10 STEP 13 Push Plastic Caps into inserts on either side of pedestal. STEP 12 Insert shelves back into pedestal boxes and place accessories as desired within shelves. THIS COMPLETES ASSEMBLY INSTRUCTION UPDATED AS OF: 12/01/2021 10 of...
Need help?
Do you have a question about the 91782 Series and is the answer not in the manual?
Questions and answers