Related Manuals for Mooreco 9169 Series
Summary of Contents for Mooreco 9169 Series
- Page 1 Compass MakerSpace Tables Part Numbers: 9169X-X-XXXX, 9169X-X-BUTCHER ASSEMBLY INSTRUCTIONS INSTRUCCIONES DE ENSEMBLAJE INSTRUCTIONS DE MONTAGE DO NOT THROW AWAY! NO LA TIRE NE PAS JETER UPDATED AS OF: 12/08/2021 1 of 6...
- Page 2 Parts List Hardware P1 - Table Top A - #10 x 1” Wood Screw (size will vary) (x18 - 48”) B - 1/4-20 x 3” Bolt P2 - Leg Bracket C - 1/4-20 Lock Nut P3 - Leg (height will vary) D - Locking Casters P4 - Support Bracket (length will vary)
- Page 3 WARNINGS AND DISCLAIMERS Review full assembly instructions and check that all parts are present before beginning assembly. Heavy or large furniture may require multiple persons in order to properly assemble. If you have questions regarding assembly, contact the manufacturer before continuing. Damage due to incorrect assembly may not be covered by warranty.
- Page 4 Attach two Leg Parts (P3) to the Leg Bracket (P2) using bolts (B) and nuts (C). Repeat STEP 1 step for other bracket. Connect Leg Bracket (P2) to Support Bracket (P4) using bolts (B) and nuts (C). Repeat STEP 2 step for other leg.
- Page 5 Lay frame on top of underside of table. Use holes as guides for placement. STEP 3 Mount frame to table using screws (A). Each leg receives six screws. Number of STEP 4 Support Bracket screws will vary by model. UPDATED AS OF: 12/08/2021 5 of 6...
- Page 6 Install casters (D,E) with lock washers (F) using the wrench to screww in caster stems. STEP 5 Locking casters should be installed on opposite ends of the table. With two or more people, flip table upright. STEP 6 THIS COMPLETES ASSEMBLY INSTRUCTION UPDATED AS OF: 12/08/2021 6 of 6...
Need help?
Do you have a question about the 9169 Series and is the answer not in the manual?
Questions and answers